hick01

I was thinking about getting the trinity 2 into 1 carb kit what's everyones thoughts on this kit or should I just stick with the dual carb setup I'm looking for a little more bottom end will this help?

Here's my problem my shee is hard to start once it's started it sounds like my left cylinder is missing I pulled the airbox and part of the boot from the air box to the carb wasent all the way on would this lean it out and cause the misfire

Ya the black tube between the carbs is there

Ok Ill try that should I change witch grove my needle is in I'll check my pilot it's what ever is stock

I got an 01 banshee about a month ago and this is one of my first post I did a complete rebuild on the motor because crank was ba when I got it I put in stock 64 mm Wiseco pistons, all new seals, I also got a t5 pipe and a k&n air filter I put a 300 main jet in the problem is it won't start when it's been sitting I can kick 100 times it will seem like it's going to start but dosent if I push start it it fires right up. It has tons of power every were. I checked the plugs and they were a dark grey. After its hot starts up first kick. Help please

i think i looked at that same quad was it in the new castle pa area