killshee

just a ? if theres no benifit and u hate doing it, y didnt u stop doing it after the first one.... or do it in the first place.... the only benift im looking for is a clean frame ....

thanx 4 the idea's and pics keep u comming lol i like loco's so far .....sleeper i have the harnis schematic and also was planing on just making my own after i move every thing what type of wire did u use and also did u cut and soldder how did u go about this also... get them pics once u get time thanx

yeah im getting ready to powdercoat and i figured i should do this while im at it lol but idk i havent seen it done

anyone have some pic of there relocated stuf im looking 4 ideas thanx

thanx ideas will help alot lol

u say its not much water .... if u have pods i would stay outa the water ....anyways check for any bare wires or anything that could b getting wet ...if there is any wires that a bare they could b working as a kill switch when they get wet killing you spark .... i had this happen b4... got stuck in a field for like a half/hour till i figure it out

well thats good if im spending less lol bc im about broke i was planing on trying to get it done with xmass money but thanx ..... does anyone have any pic of relocations of there cdi/coils and what not? it would help out alot

i was thinking 31/32mm 31 with gasket 32 without but like u siad its been a wile so i wanted two dubblecheck

stock carbs what should it b

anyone?

carb sync tool anyone have one they wanna sell .... or kno were i can get one cheep

i ment what parts as it what parts of the frame can i remove for a clean up... so im looking at close to 300 for just a basic blue... thanx guys and i will let u kno if i find a place

will do thanx 4 the info and also has anyone kno about howmuch it would runn me for light blue or a black has anyone coated theres lately? also what all parts can/cant i remove from the frame

im in a lil town close to bloomsburg pa

were is the best place to look 4 someone to powdercoat my frame i live in pa were should i look ......do u think a local autobody/car place would be able to powdercoat my frame???

just bought a P/T coolhead with 20cc domes ....... i need to change head studs...... were can i get them any one have a good set for cheep or kno were i can get them cheep

just bought the head .... not trying to be smartass just trying to save u the truble!!!

ok this is gunna sound stupid ..................i dont get it ps i drilled holes in the side of mine and run a nos injector

yeah the rents coed my loan 4 a grduation pres... then bam i hit black ice i was so pissed i lost my voice bc i was just standing there in the dark cursing up a storm. then i walked up to the house buy the rail i went thru and pole i hit and call my rents and a tow truck and that was the end of that can i didnt get hurt to bad but got some good meds=)... idk but i deff miss that car it was one of a kind and i think i would rather have the z than the sti..... the z was a chick magnet!!!! and alot nicer but i think the sti is faster.

sound like compression but u said u just did the top end.... i had this problem with mine (it was low compression) but idk did it start up good b4 u changed the jets?

i agree with the blue i think it would look very sharp but i would go with a baby blue!!!

if u have a airbox still u can take your airbox lid off and change ur jets. but im gessing u have pods.... if u have T.O.R.S. still u should remove it/no hp gain from this but u should get rid of it....... cool head and diff domes will up your compression, +4 stroker, + timing, and port job will give u a bigg gain .... u could get some 35mm pwk carbs. vforce 3 reeds cages.... thas about it as far as i kno.... anyone add if u wanna can give better info if i kno what kind of riding u do.....

use a strong acid... it could work probly

first tunner - its a beast...lmao :laugh: first car crx - full coil overs full exaust full intake and chipped sweet lil car still have it second car 350z - didnt have it long hit black ice two weeks after i got it and still miss it very much =( third car 2004 wrx sti - full exhaust, 4inch down pipe, intake, stage 3 / 6 puck clutch and 15lb flywheel.... burns gas and hauls ass!!! i have more pics on my myspace if u wanna see them

looks like a good deal ... i was looking for a like a 35mm carb will the 35 make a noticable diffrence?