BlasterKX

i usualy use 50/50 mix. its what my buddies use

if you can get ur hands on a blaster kill switch for cheap that works right you can just match the color of wires up and connect e and boom there ya go a working kill switch. its what i had to do with mine.lol

Ok fellas i ran into a lil dilama couldnt figure out why it wouldnt idle and why it wouldnt run right. found out had the wrong slides in each carb. swaped em over and got the idle done and man does it scream now. it runs sooooooo damn good now. i wasnt able to make it over 1/2 throttle but on the ice in my driveway thats beging to melt it would bring the front wells up at 1/2.lol it def runs a hell of alot better. now i just gotta wait til its not so damn muddy out so i can hit the hills. Thanks again Travis!!!!

dumb question but ur using new plugs right? what you mix your gas to? and what octaine gas you run? whats the milling of the head at?

ok i just got it together and i ran it for a few seconds a couple times just to hear it. and tom il get the idle dialed in but was wondering where i should go from here on my jetting?? its a dune/play aggresive and i am running 300 mains 27.5 pilots and toomey needles set at the 3rd clip from the top. seemed to run a lil lean cuz id give it a lil gas (maybe 1/4 throttle) and it would kinda hang there for a couples seconds. but then again it could be everything setteling in. lmk what you guys think. o ya at 530 above thanks fellas

DAMN dude i wish i could get this off you so bad man just got my house not to long ago and want one in the basment.lol id buy it from you like right now.lol

sp that white plastic looking one should do? like the shit that the chain guides made from?

Ok sorry i searching for a topic on it and couldnt find one.unless im blind but wanted to know whats the best case saver for the money? im not trying to spend a arm and a leg here but! i know you cant go the cheap ass way on something like this.lol so lmk fellas Thanks in advance

wouldnt that have been some shit if the just sent you a bag of acorns??lol sorry man i coundlt resist. hope you get them man

dam il have to see whats going on at work cuz id def like to go to the badlands for sure. never been there but heard its titties. and id def like to try some new riding area compared to the same ol shit around here.lol i just mapquestd im about 6 hours away so i can prob make it.lol

i would think your local hardware store should have some. if you got one. i dont know what the exact size is but i do know there 14mm.lol good luck bro

Like said before i have also heard that a long rod is better for less wearing on your cylinders and piston rings. i figured id throw that out there for ya. good luck man. you got any pics of it?

does that bracket bring the water bottle to its stock location without the airbox? if so r u wanting 10 shipped?lmk def interested Thanks

you can try using a propane torch and heat the hub up a lil bit and that would axpand it and then pound on the bearings see if that works.

is there any pics you got of it?

hell ya bro looking forward to going down to St.Joes this summer for sure. cant wait to ride and tear some sand up and drink some beer with you guys.deff looking foward to it man. :beer:

no problem man you cant control what other people do. but ya will do fellas will def let you all know how she runs when i get her put together. im excited!!! :biggrin:

lol my buddy had the same exact prob with his. put a resh top end on it and it wouldnt smoke or anything ou of the one side. finalyy after a couples days of looking took his pipe off and there was all sorts of crap in there lol glad to hear ya got her goin

Ok im thinking of going ahead and dressing the motor up a lil bit. i dont want to get anything to expensive. just looking for lil things here and there. lmk what you got. even if there needing polished or have some minor scrathces its all good. Thanks

lol i was thinking that but wasnt sure.

thank you guys. always nce to hear what you all think. and i took then pics.lol so i hope there not somewhere else

Cheetah cylinders ext. swinger with round house long rod kit lock out setup and works shocks all around

yeah thats who did it. he drove up here and delivered em to me. now thats something you dont get to offten.lol but hes a great guy and is smart as hell when it comes to this shit

Well i met this guy thru a buddy of mine. his company name is G.Travis Racing out of MO. his website isnt completed but here it is.http://www.gtravisracing.com/index.html very awesome guy and is very reasonably priced for sure. knows hsi shit to. when i put these on il show a vid of how it runs. thanks guys keep em coming

they were honed and cross hatched the refelection of the flash makes it look that way.