Paddleboy

i hear that vitos impeller suck wondering if these have the same problems or what http://cgi.ebay.com/ebaymotors/BANSHEE-WAT...A1%7C240%3A1318

there they are... well you got the 450s but i dunno about a 700. never came acrossed one yet or seen one in action

might just be me but i dont see any mods?

yea i hear those work pretty good but i used a circular saw

not close to you but closer then silver lake in north muskegon like 20 mins away from me is ceder creek trails which are real tight or there is muskegon trail. i havent been on that one yet but i'll let you know this spring.

ok you have stock pipes in front with fmf silencers.

those pipes are about $200 give or take shipping. if you want quieter you have limited choices. you may just need to repack you silencers. stock pipes are going to be the quietest however you will lose performance. the TORS are big goofy things on top of your carbs that look like a box and they have the idle adjusters on it. but the air adjusters themselfs are on the left side of the carbs. looks like a nice bike though have fun with it

i'm no expert on uploading pics but i use imageshack and do it there it is pinned in the for sale section how to do it

want to say thanks to MikeNick he says he has an extra set of left a arms chilling at home he will send me for free. thanks man. Fox_Forma hope you get squared away on ur shocks

so it is completly stock now? if so you should have 25 pilot and prolly a 200 main with needle in middle clip. if everything checks out (carbs clean, synced, filter clean, good plugs) and it still wont run first check the gas might have to drain and put new gas in. if it is colder up the main 2 sizes. try that out and see how it goes

first welcome to the site. what are your mods? also temp, weak spark, TORS, and dirty air filter can effect your bike idle. if it runs fine on half choke while warmed up you can either up the size of your pilot or it can be a temp issue and you may have to come in on your air screws if its colder

i like twins untill it comes time to pay double for the stuff. post up some pics of it and we'll let you know what pipes are on

what is your elevation

that or he is a bad rider

if its a mid prob then try to richen your needle one clip. also i assume since you have a +4 timing plate you prolly have pipes and filters so i would up the main first and try that. i am at 320 main when it was warm with just pipes and pods

its not the money that pisses me off cuz i only wanted the left side stock arms for 20 bucks its just that now i have to find another set and do it all over again. it does make me watch who i buy stuff off now.

yea i was just joking around but i guess it just flew right over some of ya.

yea it is

well i put my shee in the bed of my truck so that all 4 wheels are flat on the bed. but i supposed you could use a trailer too

haha i was wondering if they were trying to raise a queer

umm that was a priceless look.

yea it prolly wouldnt be hard to make a custom set

you may have too fat of a pilot. what is your jetting

lets get them going....

yea he fucked me over on some a arms. i sent out the money over a month ago and and the next week he said he got the money (money order) and that is the last i heard of him. he doesnt respond to any pms or anything. dont deal with that loser