00shee00

NOSS it is thanks guys

Can you guys tell me which head would be my best bet, I mean there are a couple to chose from Vito's hemi head, cool head, Noss's head. I just want to hear about some pros and cons what would be the best product. Thanks

PM SENT

Yeah, It depends what your doing with the cylinder? If your just breaking a glaze like these guys said wd-40, PB blaster. But if you are taking it to the next size you need something alot better, at the machine shop I work at we use mobil cutting oil in the CK-10 and rod machine. Iam sure you can get cutting oil at any good parts store. And if you are taking the cylinder to the next size alow it to cool and check your size again!

Pm sent for steering stem

Thanks for the help guys i'll get the manual and give it a werll

Hey whats up guys? Iam building a banshee from the ground up and the wiring harness I have is beat it been hacked into. Was my buddys quad since newhe had neon lights and all kinds of crap!! Well any way I want to start fresh but want to delete some stuff rear brake light, key, tors. I just want to know if anyone make a custom wiring harness?? Thanx Bill

Hey whats up guys? Iam building a banshee from the ground up and the wiring harness I have is beat it been hacked into. Was my buddys quad since newhe had neon lights and all kinds of crap!! Well any way I want to start fresh but want to delete some stuff rear brake light, key, tors. I just want to know if anyone make a custom wiring harness?? Thanx Bill

Hey whats up guys? Iam building a banshee from the ground up and the wiring harness I have is beat it been hacked into. Was my buddys quad since newhe had neon lights and all kinds of crap!! Well any way I want to start fresh but want to delete some stuff rear brake light, key, tors. I just want to know if anyone make a custom wiring harness?? Thanx Bill

Whats up guys? Iam building a banshee from the ground up my wiring harness is beat hacked into and I was wondering if anyone make a custom one. Want to delete some things the rear brake light, key, and the tors. Just want to run lights, cdi, ignition. Hopfully you guys can give me some feed back Thanx Bill

Thanks for the help, I got it now

I was looking at a set of a-arms my buddy has they are +2, up 1 will this lower my quad???

Yo dude take this somewhere else, The guys just trying to sell some parts. Take it to another forum vwpartsman!!!!!!!!!!!!!!!!!

Thanks for the imput guys hopfully it works out for me.

Man if it doesn't get there tomarrow I think Iam srewed out of some money!? :shoothead:

Man its been in the mail for 5 or 6 days I hope it gets there tomarrow. Iam starting to get worried!!!!!!!!!!!!!!!!

Guys I know this is a weird ? but I sent a letter w/money order out to Kentucky from Philly can anyone give me an idea of how long it would take to get there?

Get yourself some carb cleaner, thats is you don't have access to a solvent tank. Blast the tip of the carb cleaner in there really good all the ports. Blow dry with some compressed air. slap them on and ride!

Man this bansheeHQ forums are awsome thanks guys for all the posts I might even go with a dune port and fly :thumb:

Okay guys Iam going with a woods port, what would be the best pipe for this port? I would still like to have some top end. :shrug: Also any insight on what I should do for carbs? still have stockers

Can anybody tell me where the best place to get trans bearings is? :shrug:

Thanks i'll definitly look into the kit :thumb:

Thanks guys for the info hopefully this thing will run its ass off :thumb:

Rebuilding the top end just wondering what is my best choice for pistons is trinity, vito's, plain old wisecos, pistons for yamaha? .050 over Plan on porting FmF pipes and silencers V 3's noss head airbox withe noss K&N kit Mainly a woods quad

I got my `00 banshee 2 months ago motor needed rebuilt, took carbs off to clean and inspect. My ? is what are the things ontop the carbs some kind of interupter or something and should I delete these things? Thanks :shrug: