-
Posts
15,548 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by dajogejr
-
-
daj ur getting trolled so hard u dont even know it! lmao
Sure I am...
And Matt Shearer is building your bike...no wait, you're your own builder, no wait...your friend Kevin, who you've trash talked the shit out of,just got motors dropped off of yours for him to fix....
But I'm getting trolled...LOL.
-
10 Cub. 39mm PWK. Shearer BB in-frames. 110 octane. +7 timing. Redline Racing.
Now here's what I'd like to know.
Why BB shearers inframe on a 10 cub?
Because of the gas motor and more heat, the longer runs uphill compared to 300 feet straight line, combo or the two?
I mean...our forum expert Gumby, says you have to run SB on a 10 cub. Surely he's not wrong?
-
thats why i asked. he would know more then anyone else. im listening
My oh my....funny how've you've done such a 180. You knew it all. You could tune way better than guys doing this for years and getting it done with results.
You have the fastest builder around. Our motors are slow. You're the fastest. We know nothing, you know it all.
Now...you actually want to listen to a top builder, other than your messiah? Why? More free advice?
So you can run back and tell daddy what you've learned today and then quote it like your own knowledge?
It's funny how you can change your tune over and over again, and then wonder why no one believes a word coming out of your mouth.
If your questions were genuine, you may get some help. But you've already hooked up with the fastest builder out. You pissed all over a so-called friend, which wasn't a friend at all.
You bashed 2 people on here with proven results and then heaped lie upon lie about them.
You've been caught passing so many lies, politicians look like choir boys in comparison, and that's pretty bad.
You already know it all. And if you don't, your builder already does. Wait, you had a builder, now you're your own builder, hell...I can't eve keep up with your BS anymore.
-
Do either of you know a fucking thing about building motors?
You really had to ask that? You slippin?
-
This post sent from my iMac.........
Samsung Galaxy - Out selling the iPhone FTW. LOL
WindyJaun, the best quote you've had yet.... LOL
-
My balls itch. And I burp when I pee. I thought it was just me.
-
Brudda...I'm not talking you down. Trust me...I wish as much as you did there was a way..and I do like a premium idea.
But I just don't think it can pan out.
Cheaters and liars are going to do just that. If that means they have to pay 20, 30, 40 to cheat someone, they will.
They can easily more than make that up in one butt fucking....
I got taken for $50...as I said. Not a big deal to me, it was the point.
My friends on the forums know me. If they'll vouch for someone, good enough for me. I'm active on the forums...ok, i'm a post whore. But if a friend wants to sell something and they don't have a lot of posts, and I personally know them, I'll always vouch for them.
I've even financially guaranteed a few sales....if you aren't happy, I'll personally buy it from you, face value, no questions asked.
Our crew in MI is tight. It's a family. We trade parts, services, money, etc. One guy can make the metal, one guy can weld it, one can polish it, one can powder coat it...and so on and so forth.
I'm with you, I wish I had a magic answer just like you do. I just can't see it happening.... Tyler's been on the forums as long as me, if not longer. He's seen plenty of people come and go....as many of us old timers have. But some things never change...
-
True but if they using this site to buy & sell on what would it hurt to donate to a site that's going to give you a better choice of seller's & buyers with good honest rep.?
Here's my example on that one... Planet Sand went to a paid membership program only. People paid, people got scammed. Nothing changed other than the member count.
While I realize BHQ is nothing like PS, the theory and quite a few of the members are the same.
-
Even tho I have never been scammed on BHQ. I promote PREMIUM FOR SALE SECTION
I like the idea...but I think that would get cloudy a lot. And on top of that, you'd alienate good people and good sellers that don't want to donate to the site. Which is 100% voluntary and up to them. Not a bad idea though!
-
Is it possible you put the wrong slide in the wrong carb? Is the carb slide fully seated? Looking in through the back of the carb, do you see the little half moon shaped cut away on the bottom of the slide? Is the choke tube in place?
-
first im not selling this cub for the offers i got at 400! so wheres the lie? i got ripped off once, not gonna happen again! if this was such a bad ass cub where were the offers??? gtfo
second i dont have a builder. i build my own motors. all i needed was a crank and domes from my "builder". and for the money ive wasted on this turd. i could have called and had a motor built turnkey by the time im done!
third the build is goin just fine. movin right along! thanks for being concerned dodger
So now Matt isn't your builder? Another lie. You said he was...so now he isn't? Which is it? You said he was going to build your 10 mil cub after he fixed it all. Now he's not. Now you're just getting domes cut and a crank fixed? Really? Are you that stupid?
No need to answer...
do u feel big and bad now? talking like u know facts? so i owe kevin now?
haha kevin at herrjugs told me u were the biggest douche ever that "knows everything about banshees" kind of guy that never listened to what he had to say cause u know more then him. and he never even wanted to do any work for u. he thinks ur an idiot. that dosent know what hes doing. kevin is all about business and wont tell u to your face what he thinks of u and run his mouth like a bitch.
i dont got time for games. apparently u " got all day son". keep yappin, no one cares..come to think of it. why do YOU even care about what im doing or what motor or build i got. ur seriously flustered over this ha? u sound like a ex girlfriend wanting me back!!
Really? That's funny. I got a totally different story from him. Like how you "welded" for him...and they swingarms failed. And when he brought it up, you up and ran. Didn't take any responsibility for it.
Do you want to know what Kevin asked me to run on his motor he ported for me? His domes, his spark plugs and Shearer Small Bore pipes.
I ran his domes and his plugs. I went to the track. And no matter what I changed, they didn't make any difference in my times or MPH. So I went back to what I was used to.
As far as buying MORE Shearer pipes....after having the current set of Big Bore pipes split a seam on me 3 times, 3 years in a row...do you really thing I'd buy another set?
Even you're not that stupid. For someone that doesn't want to do work for me...he had no problem telling me when I'm ready for my next build, he's ready to get it done.
I suppose he was just being nice to me on the phone to be nice to you...the person that fucked him over years ago that he hasn't forgotten about.
We had a very , very long talk and we were very frank with each other about everything.
I don't like bringing his name into things. But if you're going to blatantly lie about shit, I have no other choice.
Email after email, until he finally had enough...and then you moved onto other builders who told you where to go.
And then once Mat gave you a price to build your dream motor, you all of a sudden build your own now? How convenient.
You pulled the cylinder off ebay. You trash talked how bad a motor was, then expect to get top dollar for it? Yep...you're a bright one.
I'm not concerned about you in the least. But when you dig up old shit and lie some more...I'm gonna call you on it. Sorry if you don't like that.
Tough shit.
Ex Girlfriend wanting me back? You got that half right. You do sound like a whiny little bitch.
By the way, I know you're a little slow. In more ways than one. But you can press the "edit" button if you have a quick thought run through your narrow mind...instead of multiple posts. Maybe you can call a few builders and have them walk you through how to use a forum.
-
You mean when you put it on eBay and then pulled it? There were several of us ready to buy it.
Another lie.
So now all these other builders take advice from "your builder". That's a good one too.
You could tell after two minutes they couldn't get you what you needed? Or...they nicely and plainly told you you're an idiot and don't know what you're doing.
Now that I believe...since it took me about the same amount of time based on the PMs you sent me over and over.
How's that build coming by the way? Trying to figure out how collect enough tin cans to pay him since he doesn't work for free?
He get tired of your dumb ass yet? The last time this came up, you got to run your mouth before I could respond.
That's not going to happen this time. I'm calling out your lies and BS every time.
Keep it this season then upgrade? Who are you kidding. You are still running the same old dune ported stock cylinder motor that was done for you 7 or 8 years ago...in which you still never made that trade/deal right. You'll get this together, blow it up because of your incompetence...and go back to blaming who you bought it off of...or quietly go back to your messiah for more help to get it to run.
I got all day son. You're a one act clown who's circus up and left a long time ago.
-
well as some have stated to buy from known sellers. well i tried that and it didnt work out. i over payed for something by 6-800 atleast because the seller never said" yea it needs a rebuild. its been ran hard and hung up wet"..true honesty goes a long way.
Honesty? That's funny. I've got fact upon fact about your honesty, your welding skills, saying you know people you don't know, doing absolute shit work and when you're called out on it...you turn and run to someone else....
I was honestly going to stay out of this thread until Mr. "I bought a drag alky banshee motor but I think I'll call several builders to have them cut me pump gas domes for now"...
If you want to keep dragging this up, I can keep smothering you with unflattering facts from multiple, multiple sources. I can call your your lies all day long. I've got the time.
You don't have a pot to piss in or a prayer to ask for one.
Go ahead, run your mouth. Chris would've helped you out on a worn crank that you claim was rebuilt several times, but never was...until you threatened him. I posted your PMs proving you don't know what you're doing or what you're talking about. And yes..I still have them. You asked me question after question about a motor that I haven't owned in nearly 2 years. A motor dozens of people witnessed kicking ass and taking names before you got it. Yet you felt the need to take your mouth off someone's cock just long enough to tell us we don't know what we're doing, we can't tune, etc. You brought that on yourself. I talked to several builders that basically said you called them begging for help and when they told you what you were trying to do was a bad idea...you didn't want to listen and called the next one.
Here's the real deal regarding selling and buying of parts. Money is tight for everyone. This is an expensive hobby we try to make cheap, but it's nearly impossible to do so without sacrifices. Want a used part at a used part? You roll the dice. Badassbanshee and myself both bought new axles years back. Ran the piss out of them. Wheelman broke both of them, the same way. The breaks nearly looked identical. Used shit breaks. Even new shit breaks. Chances are new shit will last longer. If you want to feel warm and fuzzy about a new piece, buy new.
In all my years and all my dealings on HQ, I've been shafted once. Paid for a part, never got it. Sent the guy a check from my online banking and did not use PayPal. My bad. Lost $50 or so on it...lesson learned. Guy up and vanished afterwards.
I just sold about 20 phones for my work. We switched providers. They were about 9 or 10 months old and used. No scratches on many. Some were in my opinion flawless for a used phone. I scored many 9 or 10 out of 10. I had a few people say it had a small nick here, or there. My 9 was their 7. I took pictures. I posted them on eBay. I had one guy say I shipped kinda slow. Guy paid on a Tuesday, I shipped on a Wednesday via FedEx from MI to Cali, he got it that next Monday. 3 business days. My ad said shipped within 24 hours of payment. How fast using Express Saver (I charged 15 bucks shipping) did he think he was going to get it from MI to CA. I thought I did well shipping in 24 hours and getting it to him in 3 business days. Just goes to show you.... You get what you pay for. If he wanted to pay $40 for shipping, I would've happily overnighted it for him.
In today's world of the Internet, eBay, CL, etc., Everyone thinks everything should be dirt cheap and perfect. That's not gonna happen.
I only deal with people I know from the site or if someone I know will vouch for them. Then again, I know a drain plug from a spark plug...and I don't think I'm a complete liar and fake...so I typically get treated pretty well.
You can put zero rules in place or put 20 rules in place. When it comes to selling shit on the Internet...nothing will change. Face to face or buy it new...that's the only other option.
When a motor, for example, is used...is it worth more money running or in pieces? Running. So...do you take a loss taking it apart and measuring everything? Your time, the buyers time assembling it..(assuming they know how to assemble it, which sometimes isn't the case..cough...roadkill...cough)... Or do you put your best faith in something because you know it's history?
-
Yes that is why I am on here for input good or bad. Like I said we are building it so after we get it all together it will be tnt time. Thinking +10 chromoly swingarm would that be to long?
Too much we don't know to answer that.
10 mil cubs around here...you can say from 110 to 125HP. Roughly. Don't pin that as bible.
Most of us use or used 12 to 14 over arms on stock chassis. You didn't say if you were running a stock chassis or not (or I didn't read...sorry...lol).
Now that you're getting the motor, start looking at LIGHT parts. Chromoly arms, struts, axle, etc. Unsprung weight and rotating weight savings net huge results.
I don't think I'm going out on a limb saying this. If you have a well tuned 130 HP bike, banshee based...the tune is farily good, the chasis setup is fairly good...you should have no problem running low 4s.
3 seconds is absolutely doable. But going from a mid 5 second bike to a sub 4 second is a WORLD of difference. It'll take more than just dropping a motor in.
Also...a lighter rider, say 200lbs or lighter if you're going stock chassis.
And I don't know what track you run, how it compares to others, etc. But the tracks I'm used to...a well running 130HP motor in a properly setup chassis on a good track should run 3's no problem. But it's a HUGE jump from where you're at now. Don't get discouraged if you pull it off the trailer and go mid-4 seconds.
Setup, tuning, gearing and air pressure....just to name a very few points. Then you get into clutch, etc.
-
Yea I see what you are saying. But a guy is selling his engine and getting out of racing. So I am getting his motor has dyno sheet 130hp. And I want to be the fastest around.
it's just a dyno sheet. It means nothing. Unless you're getting his hole setup, have a similar weight rider, race at the same tracks he did and he was the fastest...you'll have more work to do.
100HP doesn't mean a thing if you can't get it to the ground efficiently.
I'm not trying to knock you or what you're doing... Just trying to point out a motor with a dyno sheet is only one piece of a very large and ever changing puzzle.
A proven, well running motor is a good place to start. Then again, I've seen complete dipshits take a completely proven motor and Fuck that up too. LOL.
Good luck, you're starting off right. Just don't want you to overlook the big picture.
-
School me on lectrons, swap from gas to alky easy? Running meth right now, may go back to gas in the future.
Since these are sold, I'll crap on the thread now..LOL. (Sorry Cam...)
Special...that should be covered in a tech thread, not a for sale thread.
Cam could answer any question you have over PM or the phone...
-
Art's always been a class act over the years. Never seen him get into a pissing match here or on any site.
Welcome to the site, officially as a sponsor Art. Great to have you.
-
Waste of money. If you're fouling plugs, fix the jetting...no spark plug, except a faulty one, causes fouling or should band aide it..
-
I agree with Juan on this one.... Get rid of the power valves unless you plan on pit racing...
Unless they are all gummed up and shot, they work great for trail or dune riding. 90% drag racing? Get rid of them. No need for 'em.
-
First off, there's no such thing as an Obama Phone, just so you guys all know. There are programs designed to get lower income folks phones or help.
That being said, this just shows the ignorance of some people. Note I said some. I'm sure you can find someone running around like an idiot that leans the GOP way as well.
I think any election, going forward, you should:
1. Show photo ID. If you can't show photo ID, you can't open a bank account, buy alcohol, drive...and quite a few other day to day things. State IDs are cheap, easy to obtain and last for years.
2. Remove any ® or (D) next to the candidate. That will give anyone a chance instead of those who vote straight tickets based on party. Let's either guess...or let people actually research what folks stand for
3. Include a third party... Tea Party, Constitutionalists, Libertarian, whatever.
So, I guess my fears are:
1. Our government. How much more they can screw up, kick the can down the road and mortgage our kids' kids' kids' futures.
2. Uneducated voters...as stated in reasons above.
3. Blowing up a banshee because none of us Michigan folks know how to tune a bike and ride shit that is junk and slow.
- 1
-
last time i drove through detroit on i75, it was all run down houses. most were boarded up. it was worse than any ghetto i been in.
It's only gotten worse. Imagine the police force forced to take 10% pay cuts, work 12 hour days with less of them to patrol streets. Former mayor and cronies in federal court for RICO violations, Current mayor helpless because of the current city council.
Those buildings and houses along 75 and just about everywhere in Detroit are a result of riots of the 60s. Yeah, the 60s.
And the city has been on the decline ever since. The only difference is it's spreading to the suburbs faster than before, since houses that were worth 150K just a few years ago sell for 30 to 50K now.
How do you increase the size of the ghetto? Make things more affordable.
Sorry all, end of rant.
-
i bet it isn't that bad anymore. Most can't afford a house to get a land line, and some cant afford a cell phone.
Are you F'in crazy? Been to Detroit lately?
House worth $500. iPhone worth $600, Rims worth 5K....collectin' that Obama money.
-
I am surprised no one has said a preggo lady knocking on thier door.
F that...never answer the phone on fathers day...you just never know.
You know how confusing that day is in Detroit??
-
4 strokes are getting faster and faster...but pound for pound, dollar for dollar and cc for cc, I don't know if they ever compare to a 2 stroke.
A well built and tuned 2 stroke with less than 500cc can run 3.8 and faster without boost, nitro/nitrous or additives. Just methanol.
You'll need help and cc's to get a 4 stroke to do the same.
I'm not knocking 4 strokes...they've come a long ways. But with all the moving parts, weight and complexity of the motors...it's going to be a long time, if ever to match $ for $, lb for lb and cc for cc.
TQ wins races, but so does weight...and 2 strokes are a clear winner there.
10 mill serval or cub?
in General Banshee Discussion
Posted
Yes, and apparently stalker status and flustered means call out lies and bullshit.
I think we need a new dictionary, the dictionary according to possum.
Let me help with some key word definitions and phrases.
I build my own: I look for free help wherever I can get it...
Friend: Person I trash talk but don't know
Weld: How the fuck would I know this one. I pretend I know how.
Shearer: Open Mouth, Insert. Repeat.
Here's the funny thing. Wasn't Gumby saying a few times that I didn't setup or run my motor the way HJR said I should, yet HJR has his two of his motors. HJR isn't good enough to tell him how to set them up...but he'll go to him for port work. When Shearer does port work as well. But HJR doesn't do anything right, but wait....HJR does good port work on his motors.
Confused yet?
And even better now. He's claimed to have the best builder, yet he needs to know port specs, jetting, domes, setup, etc. Oh...and pipes. Love that one. He has his 10 mil cub at Shearer's to get fixed and ported...but he's asking others about what kind of pipe to run.
Possum, Gumby...are you seriously that stupid...and I mean, I'm talking Forrest Gump stupid. I honestly think you don't know any better and are too stupid to realize that.
Some people play dumb pretty well, but you've taken it to a whole new level.