2004LEBanshee

What kinda shocks?

Thanks alot, It wasnt the rattle that bothered me it was the dam thing hitting me in the leg every bump I hit.

no

could this have anything to do with your expert wiring job??

I dont know it sounds kinda bootleg. I'll have to sit on this one for a while. I might be taking a $8 hit on this mod.

Miller Light

TECATE 4

I bought this clutch cover of ebay. When I tried to install it i thought all I had to do was unscrew the old cover and screw this one on and I would be able to see the clutch. Well as most of you probable already know, thats not the case. Do I have to cut a hole out of the case?

After reading this mod list I think you need to get your priorites straight. My Banshee specs 1)DG YAMAHA BUMPER 2)3 PEICE YAMAHA RED SHOCK COVERS 3)2 LARGE K&N AIRFILTER 4)Toomey t5 system complete 5)dyno jet 280 screws 6)alot of stickers 7)White Brothers Boost Bootle 8)yamaha sand dune flag 9)chrome grill lining in the middle 10)pre-outer wear for filters 11)gripper gripping handles for banshee 12)red gas tank pipe ''free flow'' WHAT THE HELL ARE GRIPPER GRIPPING HANDLES??????

its a way to check your jetting. Not the most acurate. If you run wide open and pull the choke and the shee runs better then your jetting is lean. It should bog. I think thats pretty much it.

I have rode on all of those surfaces excpept sand. And I love the 6ply razors. There good traction for all of them and can take alot of abuse.

Drinking on the shee is not a good idea. I did it 3 weeks ago flew up a hill and at the top there were 2 trees that you could bearly squeeze through. Lets just say I hit the hill a little too fast and flew over the top of the hill and my right front tire cought the tree. The bike went from 15 mph to 0 instantly. However I continued to slow down at a much slower pace. thanks to the ground not haveing many rocks. Oh well nothing happened to the shee but my arms got a little cut up. Nothing another beer couldnt cure.

This is where I sent the money to 99screamingshee. dane firestone 762 rich hill road connellsville pa 15425

Are they ITP rims because he tried to trade me the plastics I bought and a set of rims for my stock front fender. Thank god I didn't do that.

Yes it was me and still is me.

NNNNNAAAAAAAAASSSSSSSSSSAAAAAAAAAA!!!!!!!!!!!!

Wait!!! Find out if you can work out a deal to take the shee with you. Gotta be some good rideing there. You could find a way to mount a M16 on the front and you could get others and be the ROOST division. Becarefull and good luck.

shit I dont need friends

Actually there doesn't need to even be an oil shortage with the use of oil shales. There rocks that have oil in than that can be extracted. However the only means that we have right now causes some polution and the land is enviromentally protected just like everything. Actually with the amout of shale that we know we have oil can be extracted from them can be enough to support world oil needs for thousands of years. We have a vast amount in our own rocky mountians. As for breaking water down, Holyman. That is VERY difficult. I really dont want to get in to all of the reason but here is a basic explaination. Hydrogen is a very weak molecule and consist of only one outer electron in it's atom. And to be really stable it wants to have two in its outer most shell by either shareing one with something else that needs one or getting one from something that has one too many. So to do that it can bond with another H or any element that wants to get ride of an extra. However Oxygen has a very strong pull (compaired to the weak Hydrogen) and to be stable it needs two more electrons so it will bond with 2 H's. This basicly makes a very strong bond that takes alot of energy to break and keep seperated. So it really isn't practical.

Guess what 99screamingshee must make banshee plastic's because thats the only other reason that my plastics haven't shown up in a month other then me getting screwed. There is no way that it takes 8 days for plastics to get from Western PA to Eastern OH. Don't feed me any more bullshit about them being on there way. And apperiantly this is the only way I can get you to respond to a message. However you didn't wast any time giving me info or address messages when it was about you gettin money. Just want it known that you should not do selling or buying from him.

Not sure what your mods ar but you could also get your crank welded now.

I just looks like a little oval shaped plate with two holes? There $10 is it worth it to make it ?

I was looking at the tag 5 bars I think there called. there 7/8 I believe. Do they come with a pad or not.

Ok, I want to get new handle bars, pretty much because of looks. I want bars with a cross bar. I also want either All black or chrome. Can anyone tell me which ones are made to fit a banshee? I dont know anything about these measurements or which ones would fit? Also I want to get a new clutch lever to get rid of all of that crap on the stock one. Which one also, And cheaper the better. Also for the handle bars do I need a clamp or not?

Either way it was our base and our inhabitants. You know what I mean.