.

here ya go: http://motors.search.ebay.com/_W0QQsassZbschmidt10

will end auction for the right price, gotta be able to end it within 12 hours though: http://motors.search.ebay.com/_W0QQsassZbschmidt10 T-Maxx with some good aftermarket set of FMF Gnarly pipes and powercore 2 silencers, chrome in good shape clutch cover, stripped, ready for polishing or a nice paint job 2 kick starter gears 2 intakes 2 K&N filters for a stock airfilter (cut) or aftermarket K&N piece Grab bar in good shape mint stock head Kickstarter (has a little rattle) Hot rods crank, needs an outer bearing all the rest are within tolerances good running stator stock clutch perch and cable 8" douglas blaster rims on 20" turfs 9" ITP rims with holeshots (not much tread left) gold stock rear rims, little banged up but in good shape (with beat holeshots, will remove if wanted) gold stock front rims with stock tires in good shape Lots of other tmaxx parts as well Have pictures, will be on ebay.....I'll post the listings later....will end auction early for right price

I used to get pounds for almost that price (700-800) depending on quality I had to buy in bulk though....... Sure wish I still had my base to start up the business again......

Nyuk might have some

you gotta look in the disposable camera section area....its usually in there....or the real cheap 35mm camera section....its in one of those plastic box thingies that are impossible to open hanging on a wall.

if ya do it for 160 shipped I'll take them. They use the same jets as the stock carbs?

where you live, I call dibs. Who made the swingarm? etc etc? Does it have tabs for a skidplate?

what size arms they for?

Just thinkin about it.....250R based frame that you can use all your BANSHEE parts on.

go with some rocketpipes dude......if your lucky.....minkia might even send you the pipes and then you can send him the money like you want

got one, 50 shipped and its yours. Paint is stripped off of it, ready to be repainted or polished.

If I ever bought another banshee to keep.....I'd just basically look for one with the most aftermarket (money potential) and for the cheapest price possible. If you dont like what is done to it....at least its aftermarket.....strip it down to the frame.....sell what you dont want....and buy what you want with it.... You'll be way ahead of the game in the long run.

good to see another person on this site with LRD's. What's your jetting at? airbox lid on or off? filter? other engine work?

yamaha needs to take the yfz jigs.....open them up a little bit in the engine compartment....and start selling them with shee engines in them. It wouldnt cost a lot of money......and they'd sell like hotcakes.

got a pic or a website pic to see what it looks like? I've got first dibs. Why ya sellin it?

I disagree with the paypal thing......use a money order....if they just take your money, you have an address.....and mail fraud is against the law

yeah.....I'm third on the list. I'll definitely take them. Have coin waiting.

why dont you look for a tapered instead.....they are much stronger

bump for the people on the computers for a living

holeshots suck....I'll never buy another pair again (unless they hook with my negative swingarm again), as soon as the edges wear off, they are junk. I've got mudsharks on mine right now as well. They are a decent tire, really soft though and wear kinda quickly. Hook pretty good though. Get yourself some 20" blackwaters.....you wanna get some traction...they are the tire to have.

If you want a pipe that will give you all the low end you want, pull as long as a top end pipe, have a nice smooth long powerband hit that if you ride in trails you can adjust where that hit comes on so you can ride in the sweet spot that gives you all the torque you can want........ GET SOME LRD'S I bought a second shee that had Fatty's on it.......needless to say it has LRD's on it now as well

I'd name him cumdumpster and then have him answer my phones at the gay hotel I owned in San Francisco.

Have pics for everything, will try to get them up shortly: T-maxx great shape, coolhead, skidplates, probably about 10-15 tanks run through it since rebuild (including 5 for break in), chrome rims, mud tires, street rims and tires, trinity springs, engine save filter. Only thing wrong with it is that the reverse servo case is cracked (little super glue and it'd be fine, will even do it for you if you want) 300 obo K&N filter for t-maxx $15 aftermarket pipe t-maxx $20 aftermarket dual outlet pipe $20 t-maxx .15 engine (ported) $60 t-maxx stock shocks $15 3 stock tires and rims $15 and now for the banshee stuff. Give me offers on the stuff. I'm looking for ebay prices about so save me the trouble of having to put them on there. Bottom End: Everything is cherry on it except the bottom case. It needs to be replaced: $300 FMF Gnarlies with powercore 2 silencers FMF Fatties, black, maybe would sell with the PC2 silencers mentioned above (only have one set) Pro-Flo K&N filter and adaptor piece 2 K&N filters (will probably fit adaptor plate, one has stock plate that is cut that it fits on) Stock grab bar Stock head (perfect to send out to get milled) whole kickstarter 2 kickstart gear assemblies (include spring and all pieces) 2 sets of stock intakes, all in great shape, soft and no cracking 2 stock reed cages, one set with carbon fiber reeds Hot Rods crank true and welded, needs one outer bearing, rest of bearings are in spec Stock stator Stock clutch perch with cable (whole setup coming off bars) 8" douglas blaster rims with 20" turf tamers (60%) 9" ITP aluminum rims with beat holeshots on them (rims look perfect) Stock front and rear gold rims, little banged up but still round and in decent shape. All offers will be taken into consideration, check with something on ebay that has a couple hours left if you dont have an idea what to offer. Everything will be going on ebay shortly.

dont get a dakota....I have a 99 and regret having it almost every day......its a decent truck....I just wouldnt buy another one.....

what's the setup on the shocks. Rezzies, weight, type a-arms, dual triple rate? I've got a brand new set of stock arms I would trade you for them maybe. Dont know about the tie rods yet, you need the ends for them?