Jump to content

Steering stabilizer

Recommended Posts

Here Is where it attaches To the Stering Stem you Have to make Sure you Mount it low enough on the Stem As to not interfere with the Radiator and that the stem turns freely in both directions, I also added a 1/8" washer to the lower rad. mounts just for Grins.


Link to post
Share on other sites
  • 13 years later...

Thread mining....


I attempted to bolt the pep stick stabilizer up like pictures above...

oversize radiator, Paul turner pipes. 

I used the same motor mount bolt hole as pictured. I had to run my stabilizer and the stem clamp to the opposite side of the photo above as the lower water neck and rad hose was in the way.  Seems I won’t notice the dampner “working” until I hit something hard going fast. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...