Jump to content

carb.


jamie

Recommended Posts

sounds like it's the overflow hose, which is supposed to drain excess gas from the carb, like when you have a float sticking. maybe that's your problem. the overflow usually points straight back though.

Link to comment
Share on other sites

that also can be used to drain the float bowl.there is also a screw on the foat bowl for the draining purpose make sure the screw is tight.turn it clockwise and make sure its good and snug.if it is then your float is probably sticking.if thats the case take carb apart clean it good and check your float bowl hieght.and as far as the hose goes its just a drain tube i believe it should go straight back from carb and go down between swing arm and frame and point twards the ground.also if your float hieght checks good it is possable you could have a bad neddle and seat

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...