Jump to content

01 banshee stock toomey t5 jetting


Recommended Posts

Good morning guys , I just bought a banshee and it was running awesome I just wanted to replace the intake boots bc they had some minor cracking in them and did not want them to eventually suck air and blow my motor so all I did was replace the intake boots and gaskets boot them back on and now it will not run and when it does it’s flooding out and sounds like it’s only running on 1 cylinder ... I took bottom bowl of carb off cleaned and inspected floats sprayed out the main jet and still will not run right . The tors is still attached to carbs . Let me know your thoughts bc I am stumped and frustrated as to what’s going on thanks 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...