Jump to content

DC convertion from JDS customs work with my digital ignition ?


Recommended Posts

Hello , i want to buy a kit DC conversion for my Banshee.

Can you tell me if this DC conversion work with a ignition MVT Premium ?

I have a wire with 60w of power for my led light bulb ,but it in AC current

the yellow wire from the stator is my 60w power

allumage-electronique-250-350-rd.jpg

 

Thanks you for your answer

Edited by NitroObsidian
Link to comment
Share on other sites

Yes, if that digital stator is putting out 12VAC nominal voltage the JL kit from JDS will convert it to DC.

Sent from my HTC U11 plus using Tapatalk


Does not need to be 12VAC, just >12vac. Voltage will vary with RPM and likely peak at around 40VAC. The kit includes a regulator/rectifier. But otherwise you are correct.

Edit: Just to clarify further, the DC voltage after rectification is (1.41*VAC)-(diode voltage drop)=VDC. So if the reg/rec is set to output 14.4VDC and assuming a diode voltage drop of 0.7V and a full bridge rectifier, then you need > (14.4VDC+1.4v)/1.41= 11.2VAC.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...