Matt00695 Posted January 29, 2021 Report Share Posted January 29, 2021 Hey guys, I’m having an issue with my banshee. I am having an excessive amount of oil spitting out both sides of my muffler when I rev it, and now it has a strong burnt smell to it. The bike is completely stock with OEM pipes. I'm running a 32:1 ratio. I've done a leak down test, and it held pressure. Compression is good on both cylinders. I’m running 25 on the pilots with the air screw backed out at 1.5 turns. float height is set at 21mm Running 220 mains for the winter set up. The picture below is showing what spits out of both sides of the exhaust. And it can cover my entire hand. Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted January 29, 2021 Report Share Posted January 29, 2021 Could just be build up, if you have room run the shit out of it, as long as you can...usually it'll burn out, gotta get it really hot tho ( also will be a good time to scrap any melted pant leg goo while hot too( Quote Link to comment Share on other sites More sharing options...
SKEETER Posted January 29, 2021 Report Share Posted January 29, 2021 Wide open throttle in neutral for about 45 seconds is what n2otooslow4u swears by. Quote Link to comment Share on other sites More sharing options...
registered user Posted February 5, 2021 Report Share Posted February 5, 2021 do u have advance timing? +8 should clean any oil out Quote Link to comment Share on other sites More sharing options...
Matt00695 Posted February 8, 2021 Author Report Share Posted February 8, 2021 Thanks for the response guys. And no I do not have an advanced timing plate. Stock plate. The bike is completely oem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.