Jump to content

whats a good 1/8 mile time ?


Fordfamily63

Recommended Posts

we have the wifes banshee running 7.74 - 7.82 1/8ths is that good?  Its on a heavy drag frame with a +8 swing arm mainly so I don't have to worry about it standing up with her . Motor is stock crank stock cylinders 80 over is ported but not drag ported say a maybe a dune port at best .  Boyesen super stock reeds  40 thousandths off stock head 34 or 35mm air strikers no filters . Timing plate compression is 140 17 front 38 rear Hinson 8 plate basket no lock up an trinity  small bore out frame pipes .  So for the mods an being pretty heavy 7.74 83 mph 1/8th (best) 7.86 82 mph 1/8th (worst ) is that pretty good ? Is on pump gas 93 octane with 18x8x10 rear . My question is that good times for what we have or should I expect more an yes jetting seen to be good we are 2500-3000 elevation  . I just wanna know is it good been around built  6.50s 6.00s bikes alot but not any thing like ours to judge against.  Thanks in advance !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...