Deets Posted July 30, 2020 Report Share Posted July 30, 2020 Been pretty busy the last couple months, finally got the bike out for a ride. A little fat, but that’s to be expected with the heat. Did some road riding and I could feel and see the bike torquing sideways when I’d get in the throttle, then straighten up when I let off. Checked it out and the adjusters move up and down freely (not sure if that’s normal), and the axle has play back and forth in the swing arm. I’m not convinced that just tightening up everything will keep the play out. I’m sure some of you guys have seen this before? Quote Link to comment Share on other sites More sharing options...
06bansheeohio Posted November 6, 2020 Report Share Posted November 6, 2020 mine did that when the needle bearings in the swingarm were shot and the stock carrier bearings were shot Quote Link to comment Share on other sites More sharing options...
10mmbandit Posted November 8, 2020 Report Share Posted November 8, 2020 had the same problem snugged everything up helped the problem a bit got rid of some play. Dug into it a bit and all the bearings involved were toast. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.