Jump to content

Head and Tail lights dont work


Recommended Posts

just some info dump here.

 OEM banshees dont have battery's,  never have.  They power everything off of the stater,  the stater has a coil for spark, and one for the light circut.  This being said it has to be running for the lights to work,  You also need to have a voltage regulator,  normally it is mounted to the frame on the back of the subframe, by the CDI box.  IF not, the stater can put out too much power when you rev it and blow all the bulbs.   

 

Only time you will see a Bat on a banshee is when someone put a DC conversion kit on, so they can have more power for a LED light bar, or to try some fuel injection stuff etc.  

Link to comment
Share on other sites

All rights thanks for the info but I found the problem. Behing the lights are the adapters to the wires (duh) and none of the wires are connected. So I found the problem. Thanks guys. I'm also looking for some LED lights so if there are any recommendations please let me know. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...