Lriver1004 Posted June 17, 2020 Report Share Posted June 17, 2020 I currently have pro circuit pipes on my shee but I have found that one of my pipes is cracked/ leaking. I also have a set of T5 pipes sitting around. My question is will going to the T5s from the pc's affect jetting? Could I just put the T5s on and be ok?Setup is:421cc Athena cylinders and cool headChariot 2 into 1 with 36mm PWKPro circuit pipes+4 timing Thanks! Sent from my SM-G973U1 using Tapatalk Quote Link to comment Share on other sites More sharing options...
This old banshee Posted July 30, 2020 Report Share Posted July 30, 2020 Better Late than never. Realistically... You should have no problem swapping pipes no need for a jit change I've had similarly built rz350 s and swapped at least 6 different pipe manufacturers bike ran great with all of them. only if your dyno tuning the bike are you going to be able to dial an insignificant difference like that in from jetting... That's my opinion in my opinion only, no doubt others could differ. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.