hoppedupandcutdown Posted April 19, 2020 Report Share Posted April 19, 2020 1 hour ago, ConnorJ19 said: Now the voltage regulator just has to tap into both of the yellow wires going to the lights correct? And I just have to ground the voltage regulator to a good ground. splice in the taillight wire, that way it is before the hi/low switch and won't connect the two individual circuits. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2020 Report Share Posted April 19, 2020 1 hour ago, ConnorJ19 said: My guess is that since the voltage is very irregular, it probably blew my led bulbs? The bulbs are also 55 watts so I am guessing the stator wouldn't have been able to power them as is since it is stock. No, they blew because they aren't going to work on AC voltage, and the 55W is equivalent output, not draw. Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted April 19, 2020 Report Share Posted April 19, 2020 splice in the taillight wire, that way it is before the hi/low switch and won't connect the two individual circuits.He's not using the switch ^But yes Sent from my SM-A505U using Tapatalk Quote Link to comment Share on other sites More sharing options...
DuneRat Posted April 21, 2020 Report Share Posted April 21, 2020 flashlights are the solution. Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted April 21, 2020 Report Share Posted April 21, 2020 You really are skeeters sonSent from my SM-A505U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.