Dothejingle Posted November 12, 2019 Report Share Posted November 12, 2019 My clutch is very hard to pull back any way I can loosen it? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Fearnot Posted November 12, 2019 Report Share Posted November 12, 2019 Have you inspected the cable for wear or properly lubricated it? Buy a motion pro cable luber and if it's still an issue you have something more serious going on internally. Quote Link to comment Share on other sites More sharing options...
Keno Posted November 13, 2019 Report Share Posted November 13, 2019 I don't know much about Magura clutch set-ups. But, have you checked/cleaned the line, slave cylinder, andmaster cylinder? Checked the lever for binding? Is it adjusted properly with the clutch? I believe you can buy different diameter master cylinders from magura. Not many run magura set ups here, you may have to call Magura. Don't know if it'll help, but here is a setup video from RMATV. Quote Link to comment Share on other sites More sharing options...
ride.race.live Posted November 13, 2019 Report Share Posted November 13, 2019 a hydro clutch will still have some pull to it... ive had a magura and it was stiffer then expected.. .ended up selling it as the master cyl was leaking. I found the streamline hydro clutch was smooth but lacked adjustment for the clutch pull Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.