Deezil Posted February 7, 2019 Report Share Posted February 7, 2019 So I have an 87, and I replaced the key switch, the new one isnt wired correctly, it has the correct 4 pin plug on it, but when the key is turned on, only two of the pins go 'live/short' and I need all 4 to go 'live/short' Any ideas? The bike will pop but not start with the new key switch, if I jump the remaining two pins with a wire itll run as normal, but the key wont shut it off. Quote Link to comment Share on other sites More sharing options...
sycoticbanshee00 Posted March 4, 2021 Report Share Posted March 4, 2021 I got tired of dealing with the key switch, so I ended up bypassing it with the adapter from south Texas banshee, it plugs into your harness. I have an 01, but I believe he makes one for your year as well, one less thing to worry about. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.