Banshee508 Posted December 6, 2018 Report Share Posted December 6, 2018 This piston is .50 over correct?? and what do you guys think nasty or normal Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Banshee802 Posted December 6, 2018 Report Share Posted December 6, 2018 Yeah that’s .50mm over. Stock is 64mm. I don’t know what brand they are. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted December 6, 2018 Report Share Posted December 6, 2018 Looks good. Running a little rich if you ask me. But the wash is showing up so you know something is right. Sent from my SAMSUNG-SM-G891A using Tapatalk Quote Link to comment Share on other sites More sharing options...
ZillaFreak Posted December 6, 2018 Report Share Posted December 6, 2018 .5mm over is .020" over. Look closely before buying a piston kit. A .050" overbore will be a 65.25mm piston. Make sure to just pay attention when ordering so you don't order the wrong size. Quote Link to comment Share on other sites More sharing options...
Banshee508 Posted December 6, 2018 Author Report Share Posted December 6, 2018 Ok thanks guys was just wondering if that looked ok as i never looked into it before. the top end is at 125 psi both sides cold (wot) so i shouldn't need new pistons yet An i came to a conclusion that ive been running it rich been mixing it 40:1 when its set up for 42:1 probaly gunna take it apart to check/replace all seals an gaskets and bearings if needs to be Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.