Jump to content

Recommended Posts

Hey guys, i know its been talked about 4 million times... BUT.... I need a little help with jetting on my banshee i just bought.  

Mods: 

Bored .003 over

CPI small bore in frame pipes

Keihin PWK 28mm carbs

Noss Machine cool head with 18cc domes

K&N pods

Trinity dune port

Boyesen Dual stage reeds

I've never ran the pwk on any of my other banshees before or CPI pipes. I ride at about 4000 feet above sea level. Any input on where the jetting and needles should be set to get me close would be great. thanks 

Link to comment
Share on other sites

jjh needle is common for 28s

dude on here that rides at high alt ended up around 40-42 pilot  140 main with a ported 4 mil on pump fuel.

r u running race fuel?   42-45 pilot 142-145 main should be safe

 

Edited by Ayesully810
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...