allboutwork3203 Posted April 26, 2016 Report Share Posted April 26, 2016 Hey was up guys had ? I want to put some cool heads on the banshee looking at pro design, Vitos or noss need some fees back Sent from my SM-N900T using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 27, 2016 Report Share Posted April 27, 2016 Whatever you buy, make sure the dome's are correct for your motor. If you aren't physically measuring to be sure, you are doing it wrong. Also, if the big O-rings around the cylinder bore aren't Viton, they are garbage. Quote Link to comment Share on other sites More sharing options...
camp0429 Posted April 27, 2016 Report Share Posted April 27, 2016 http://drivelineperformance.com/yamaha-banshee-billet-cool-head/ I have this one ^^. No complaints at all. If you go with the Pro Design you have to switch out your head studs and use an o ring on each stud where the Driveline head you don't have to do either. Quote Link to comment Share on other sites More sharing options...
CFH87 Posted April 27, 2016 Report Share Posted April 27, 2016 Driveline also cuts stock ones to accept aftermarket domes. Be good for a stealth look if that intrests you. Quote Link to comment Share on other sites More sharing options...
allboutwork3203 Posted April 27, 2016 Author Report Share Posted April 27, 2016 Thanks fellas thanks alot Sent from my SM-N900T using Tapatalk Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 27, 2016 Report Share Posted April 27, 2016 I have this one ^^. No complaints at all. If you go with the Pro Design you have to switch out your head studs and use an o ring on each stud where the Driveline head you don't have to do either. Do you have to use cool head specific orings for the studs or can you use any run of the mill o ring? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 27, 2016 Report Share Posted April 27, 2016 Regular o rings, but certain hardware stores won't have them. Quote Link to comment Share on other sites More sharing options...
camp0429 Posted April 27, 2016 Report Share Posted April 27, 2016 Do you have to use cool head specific orings for the studs or can you use any run of the mill o ring? Regular o rings, but certain hardware stores won't have them. I haven't looked in any hardware stores, When I bought my head I ordered an extra kit just to have. The Pro Design kit comes with all the little stud o rings as well, but those are not needed for the other cool heads. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 28, 2016 Report Share Posted April 28, 2016 I recently bought a stock head that's a stealth style from driveline. Its cool shit! I'm not into all the shiny shit. It's about as sleeper as it gets in my opinion.........well besides Carl. sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 28, 2016 Report Share Posted April 28, 2016 I recently bought a stock head that's a stealth style from driveline. Its cool shit! I'm not into all the shiny shit. It's about as sleeper as it gets in my opinion.........well besides Carl. sent from yo mammy house. Pics? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 28, 2016 Report Share Posted April 28, 2016 https://uploads.tapatalk-cdn.com/20160428/2cc5414cbd2c2a4bd67a58900437f9f1.jpg[/img That's the bottom side. Top looks stock lol sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 28, 2016 Report Share Posted April 28, 2016 https://uploads.tapatalk-cdn.com/20160428/2cc5414cbd2c2a4bd67a58900437f9f1.jpg[/img That's the bottom side. Top looks stock lol sent from yo mammy house. Pics don't work. Try again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.