CP5899 Posted January 21, 2013 Report Share Posted January 21, 2013 The chassis had an 82" wheel base. +9 in the rear and +24 in the front. It's a cpcustoms 3/4 super light chassis. The whole chassis is made of 3/4 chromoly except the engine cradle. The engine cradle is 7/8 chromoly. The bike has been 3.8's at Planetsand with a 4mm cheetah. For sale with the chassis is the frame, torch works radiator, steering, tie rods, and wheelie bar. Asking $2000 for everything. Let me know if you have any questions. 1 Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted January 21, 2013 Report Share Posted January 21, 2013 Where are you located? Quote Link to comment Share on other sites More sharing options...
CP5899 Posted January 21, 2013 Author Report Share Posted January 21, 2013 Forgot the aluminum gas tank is also included with the frame. Here's a few more pics showing the tank and paint. The above pics are a bit dirty from just riding it. Quote Link to comment Share on other sites More sharing options...
CP5899 Posted January 21, 2013 Author Report Share Posted January 21, 2013 In Baton Rouge la. Quote Link to comment Share on other sites More sharing options...
2strokes4u Posted January 21, 2013 Report Share Posted January 21, 2013 nice frame Quote Link to comment Share on other sites More sharing options...
2strokes4u Posted January 21, 2013 Report Share Posted January 21, 2013 can u use that for asphalt? Quote Link to comment Share on other sites More sharing options...
CP5899 Posted January 21, 2013 Author Report Share Posted January 21, 2013 I run a lot of asphalt and only brought this bike to he track one time. I put a 17-40 on it and when I made a pass I ran out of gear at the 450-500 mark because I forgot I had a 1-5 in the bike. My asphalt bikes all have 1-6's in them and I didn't even think about not having the right Trans in it for the 1/8. That being said it still went a 6.4 at 75-80 mph. I just backed off the throttle and maintained rpm to cross the line. The 60' time was in the 1.38 area. So yes it can be used for 1/8 mile. The bike tracked straight, but that was the only pass I've ever made on the chassis in the 1/8. The motor that's in it dynoed 125hp if that helps comparing to your motor. Only reason I selling it is to build a dune chassis. Most of the dirt/sand tracks with in a 2 hour radius closed and I don't want to drive further then that for a night race. I have two asphalts with in 30 minutes and the dunes are 2 hours away. So just changing up chassis setups for what I'm riding these days. Quote Link to comment Share on other sites More sharing options...
superbadracing@1978 Posted January 22, 2013 Report Share Posted January 22, 2013 If you dont sale d frame wil you part out d tank Quote Link to comment Share on other sites More sharing options...
CP5899 Posted January 23, 2013 Author Report Share Posted January 23, 2013 It matches the deminsions of the frame. Have another one I can't post a pic of. Quote Link to comment Share on other sites More sharing options...
superbadracing@1978 Posted January 23, 2013 Report Share Posted January 23, 2013 Ok great how much Quote Link to comment Share on other sites More sharing options...
superbadracing@1978 Posted January 24, 2013 Report Share Posted January 24, 2013 Interested in d other gas tank you hav could you post a pic of it Quote Link to comment Share on other sites More sharing options...
CP5899 Posted January 24, 2013 Author Report Share Posted January 24, 2013 It was made for a drag chassis so you may have to make a couple mounting brackets to use on your personal frame. Not sure if it will work with plastics. It was made to run with out plastics as it matches the frame of another drag chassis I had. Quote Link to comment Share on other sites More sharing options...
CP5899 Posted February 7, 2013 Author Report Share Posted February 7, 2013 Bump...open to offers Quote Link to comment Share on other sites More sharing options...
chrisp250r Posted February 8, 2013 Report Share Posted February 8, 2013 are you selling this as a roller? Quote Link to comment Share on other sites More sharing options...
CP5899 Posted February 9, 2013 Author Report Share Posted February 9, 2013 Want to sell everything but motor, wheels/tires and axle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.