locogato11283

I wouldn't waste money on the Flex bars. That's a ridiculous expense. I have this Alba +2 stem. It's nice. https://www.ebay.com/itm/184955487409?fits=Make%3AYamaha&itmmeta=01HVVK777EVB43A4DXQXZDJVYD&hash=item2b1034c4b1:g:jdcAAOSwcaFZH0ca&itmprp=enc%3AAQAJAAAA0Bd9Cskx2%2Fa2%2FfQcfzQMhMWXIUGeBAwqgTER862IQb%2F0AWp9kmfdnCFKiGwTBAIbvHWh92FxjQK8QNjFYOwoiTnPNmldxPXRBWAJZdRS5b4oNNgR68DYEpyLV%2FGkc9SfaDdYvvkjBtL41rt4QXRp7EHgUmG%2BH9Zx3AUsZHG6ylZOp4tXSbBjiUNRUfVRtQjUe3N77QtA9EGlMTHHyXcGPuSbe4zQ1qtn5ab%2B5ffF40KoYhAekZ6mg%2Fc%2B6ANHX1zcszF9CkLgBGbnpgLHZ4GDX1M%3D|tkp%3ABk9SR-jznPPeYw A-arms typically come with the correct tie rods. What "clutch setup?" I'd buy a new cable. Again, a fraction of the cost of Magura. Go with Driveline sprockets and chain.

You can just ditch the tank completely. As long as the radiator is staying full, you're good. Just run the hose that goes to the tank straight to the ground.

That’s bullshit. They are not “good out of the box.” First trip on mine out of the box and the fucking float fell out of one carb and then I pulled one of the fuel inlets out. Total junk. PWK is a superior carb.

Lectrons are junk. I'd go with Keihin PWK.

No.

Have you checked your coolant? If the gasket or o-rings are bad, it can pull coolant at high RPMs. This could’ve happened overnight as well.

You can’t. Rivets have to be ground and driven out.

Just tighten them a lot and be done with it. I’ve never torqued them.

I was talking about the member Deadbeat.. He was in this post a lot.

Fucking Deadbeat.

I recommend CST Pulse. 20x11x9 rear. 21x7x10 front. https://www.csttires.com/us/tire/pulse/

Is the flywheel OEM?

That’s not super likely. Are you sure the stator and flywheel are good? Do you have a known working CDI you can try? I’m betting faulty flywheel and/or stator.

We’re just waiting on you.

I have his new address, but I am not telling you stalkers.

Just FYI, Cam at Redline is in the process of moving and likely isn’t taking on projects for 6-8 weeks.

No wonder you like me so much. Fuck. Now I have to change my name.

No. Loco gato in Spanish is “fighting chicken.”

Crazy cat?

Just use a socket the same size and tap it in there. Put some grease on it.

Just use the BansheeHQ Sponsors. https://www.bansheehq.com/bansheehq-sponsors/

Seriously?

CST Pulse

Klotz Techniplate CST Pulse tires

Welcome to BansheeHQ! I own this 3rd rate website and Skeeter is our resident fluffer. You really can't go wrong with Klotz Techniplate. I always ran Sunoco 110 for gas and VP or whatever methanol was available for my drag motors.