Bobbys_world07
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Bobbys_world07
-
-
Sweet.. now for gear oil.. any recommend’s I have some bel ray 80w-90 gearsaver.
-
So I bought another tester and I was able to get 150psi
-
He didn’t just that it’s what he uses Because I was wanting to run yamaha’s but he said after porting they clean up and hold good up and they are proven witch I trust him.. I have a drag play port tho!
-
On 1/11/2009 at 1:10 PM, BklynLOD said:
I have the same setup, 22cc domes, +4 timing and cant get why I'm running 165 - 170 compression. Tested it with like 5 different compression testers and got between 165 and 170 between all of them. I have to run race gas. The weird thing is I ran 93 on it before I realized my compression was so hi and didn't blow the engine. While testeing we remove spark plug. Open the throttle wide opne and kick about 15 times.
I live in Florida and they are after market.. bought from Kevin Herr
-
I’ve just bought a 05 shee a few months back and decide to do a restore and to get me more power..now I’ve have every thing back together and motor in I did a compression test. My setup is new stock cylinders & bore on a 7 mil with 22 cc domes. Planing to run 110 octane.. I bought a otc compression tester and Tested both cylinders witch they made 120.. I did my Squelch test and they were both Consistent with a .50 and .53.. is it a faulty reading with my tester? I’ve read where the long hoses can give you miss reading. This is my first 2stroke build so I’m a little wet still, so some input would be sweeet.
Coolant, how much to put in?
in General Banshee Discussion
Posted
I just did a rebuild Witch was completely dry and I used engine ice witch it didn’t use it all But most of it. jug is a 1.89 L ....
im also running an after market. mishimoto radiator.
As long as it’s full and Circulating I wouldn’t worry about it.