Jump to content

Fr33zypop

Members
  • Posts

    88
  • Joined

  • Last visited

Everything posted by Fr33zypop

  1. From other research they are the same. Sku matches. Sent from my iPhone using Tapatalk
  2. I ride very little and change it every year. I’m not looking for other options. Sent from my iPhone using Tapatalk
  3. I’ve used the bottle on the left for years but the Yamaha dealer said they switched labels and I’m worried it’s not the same. Can you please confirm if this stuff on the right is safe to run. The upc codes on the back are right but if I search the 4t it says 4 stroke. Sent from my iPhone using Tapatalk
  4. Just wrapped up the cable install. It wasn’t bad to wrangle around and I could get the tank up enough to get my hands underneath. Night and day difference with this new cable and it even synced by eye balling the caps. They were not even on the last cable. I’ll skip the spark plug wires for now. Sent from my iPhone using Tapatalk
  5. Crap. The dipshit before me rolled it and the frames bent enough I can get the tank out. I’ve tried when I had to put a new petcock in it. Sent from my iPhone using Tapatalk
  6. Let me first say I have no really done much other that opened the box with the parts. I wanted to try to get a plan before attacking this as the last little project of replacing the dust boots on the rear brake took me way to f'in long Sunday. I have looked without taking any plastics off regarding the plug wires but is its pretty straight forward in finding the coil? I am just upgrading the wires at this point, mine do work fine but.. The throttle cable now (TORS Removed) seems like its got a pretty tight bend behind the radiator so I wanted to see if someone could recommend the best way to route it back to the carbs.
  7. I did check them out yesterday and I do appreciate the suggestion. Just trying to get all options on the table. I think the 916s will probably be what I go with in the end!!
  8. I have not but I will be.. Thank you!! Edit: Looks like they are not manufactured anymore and I don't want used.
  9. Can you unabbreviate that? Lol Sent from my iPhone using Tapatalk
  10. I know my pipes are a set of old Bills Pipes and I am not 100% sure what brand silencers are on there but I am looking at replacing the silencers. Without modifying anything would others match up with the length? I am not sure what to go with but mine need repacking and I don't want to repack them. I was about to order some T5s but they jumped $250 since I first found them last year. Not trying to start a war but what are the best exhaust setups these days? Mods - Mild bore, vforce 4 reeds, knn pods.
  11. Loosened the bolts on the bracket got it moving. I’ve ripped some of the rubber surround but it’s fine imo. I don’t got in water or sling mid. Sent from my iPhone using Tapatalk
  12. After finding a rebuild video I found the issue and new pads are in. Sent from my iPhone using Tapatalk
  13. I can’t get this to budge so I’ll need to replace it. The Yamaha dealer can get a oem one for 400+ so I’m looking for opinions to other options available online. Anyone have any experience with ones on eBay? Sent from my iPhone using Tapatalk
  14. Piston is not frozen and moves fine. If the two slide pins are supposed to move they don’t. I can try to soak them tonight. Sent from my iPhone using Tapatalk
  15. I could use some help on this. I don’t have the ebrake assembly anymore. This plate on the right. Is it supposed to move at all? I’ve tried to get it to move in with a clamp but it won’t budge. Not sure if it’s seized or what. The only pad I can fit is one with the pad 100% gone. The new one will but the rotor is pinched and won’t fit. Sent from my iPhone using Tapatalk
  16. The current setup meets my needs so probably nothing crazy. Sent from my iPhone using Tapatalk
  17. I knew this would eventually happen as I have been the most gentle with these carbs but last night was the last straw. The threads for the screws for the bowl cover let loose and I wanted to see what options I have are. I am familiar with tapping new threads. The only threads I lost are the one with the little round guides to hold the fuel overflow tubes. I tried and was able to get them tight without those guides so I am wondering it I should look for longer screw? I've only tapped steel so with aluminum I just want to be sure I don't mess it up more. The last option I have is to get a new pair of 28 keihin and seems like my best option. These old carbs have seen better days..
  18. I don’t have the parking brake setup anymore and was removed before I owned it. I’ll have to research that. Thanks Sent from my iPhone using Tapatalk
  19. So I’ve replaced a ton of brakes in a lot of cars and trucks and wasn’t to worried about the banshee but wtf. I can’t seem to fit the new pad on the right side of the caliper. When I tried to put on both new pads the rotor was getting jammed by this raised area. What am I missing here? I watched some videos already but I haven’t seen this issue raised. Because I was about to go for a ride I had a pad that was completely wore off to get it to fit. Sent from my iPhone using Tapatalk
  20. Earlier this spring I put in a new petcock as mine was leaking and this weekend I had a chance to to for a ride and while warming up the shee I could tell it wasn’t running well. I’ve come to to conclusion the gas isn’t flowing real well. When I removed the old petcock I found the plastic fuel filter has fallows off in the tank from a rollover or whatever from the last owner. I have a pretty new under 40 mile inline filter I’ve ran without issue on the old open petcock. I’m wondering if have two filters If it’s restricted. It’s hot af here so I plan to try and get a new inline and hose to see if that helps some early morning this weekend . I might try to drain the tank but I need a hand pump to see if the other filters the issue. The stem is bent in so I can’t remove the tank or petcock easily. Sent from my iPhone using Tapatalk
  21. Earlier this spring I put in a new petcock as mine was leaking and this weekend I had a chance to to for a ride and while warming up the shee I could tell it wasn’t running well. I’ve come to to conclusion the gas isn’t flowing real well. When I removed the old petcock I found the plastic fuel filter has fallows off in the tank from a rollover or whatever from the last owner. I have a pretty new under 40 mile inline filter I’ve ran without issue on the old open petcock. I’m wondering if have two filters If it’s restricted. It’s hot af here so I plan to try and get a new inline and hose to see if that helps some early morning this weekend . I might try to drain the tank but I need a hand pump to see if the other filters the issue. The stem is bent in so I can’t remove the tank or petcock easily. Sent from my iPhone using Tapatalk
  22. Yeah my bad on that lol Sent from my iPhone using Tapatalk
  23. I read a post from a while back they said they tossed the white cover so think that was wrong until I looked at other installs of case savers. I ordered a new one. I see some wear from the chain so I’ll smooth that out and use lock tight. I think it just got loss but the oring is shot too. Sent from my iPhone using Tapatalk
  24. I took off the saver and found the white cover was behind and cracked. I’ve had it some what tore apart repainting the frame and have been tracking where it’s coming from. I don’t know if someone has a print size I’d need to use here as it not there. Sent from my iPhone using Tapatalk
  25. I'll just pull it i guess and see what the issue is. I don't know what vents would be around the case saver.
×
×
  • Create New...