B-shop164

Only 400 feet

Yes i have a good tester and the domes is suposed to have the good elevation

Cilinder kit cheetah cub 68/58 brand new and piston from fast clean ports /domes 20cc/10 /052 and the squish is .050 Brand new gauge and another gauge said 130 psi to ,throtle wide open and 20 kick and over .. the two side is exacly the sames compresion and all seal and all around is brand new !

Hi, i have 20 cc BB race fuel domes from f.a.s.t in a cheetah cub and i have only 130 psi on each side? I chek with two new gauge and the same result ? Whats the prob ? Domes or leak?? Brand new motor fresh rebuild

Up

Ti zizouneeee 🙊

Hi , it is normal when i chek my spark plug after 1 days no runing My plug are wet ? Its is gaz ( race fuel ) or coolant? The two side are wet and i completly rebuild the motor and put new O-ring in my cool head !

It is a must to do a « porting » on a cub ? Or when i buy it « cleanport » its okays? .. setup for oval racing for best result

Yes, i have all information aboute my engin , but no formul to calculate

Yeah,!

How can i calculate the good octane my engine need ? Its is possible to calculate ?

Thank you sir

Me ?

Bad issu for me he ship me the wrong machined domes 2 times and after no issu to Contact with him

First im testing with .062 solder but he dont touch , after im taking 3mm solder and the squish are done at .078. And its BPRACINGatv.com..