Jump to content

ClaudeMachining

HQ Premium Member
  • Posts

    6,858
  • Joined

  • Last visited

  • Days Won

    105

Everything posted by ClaudeMachining

  1. Goats ftw!!! Envoyé de mon SM-S908W en utilisant Tapatalk
  2. I'm using Kehin pwk 39mm because I'm used to set them up. I dont have any experience with the smartcarb/lectron stuff. As far as fuel, just tell the builder what fuel you will use. Your 97-100 ron fuel is the equivalent of the premium pump gaz (92-93) here, so that make the uccr in the 12ish range Mine was set to run Avgaz (105) , so my uccr is higher. I have 2 sets of domes, the 30cc are 178 psi kick compression and the 31cc are 168psi. I guess that 12.5 uccr will have something about 140-150psi, depends of the port timing and squish. Maybe you can look for the late RD 350 tranny, they have longer gearing iirc. Mine was done by Joe Morinali, and i have all the mods in it (pro mod) Envoyé de mon SM-S908W en utilisant Tapatalk
  3. I dont have much to say. It look like you did your homework. Redline is for sure, a great builder. You can get Driveline cases, dunno if they are cheaper than oem, price wise. Go with Crankworks billet crank. Don't be afraid to ask specific questions. Envoyé de mon SM-S908W en utilisant Tapatalk
  4. In French it's : You gay Envoyé de mon SM-S908W en utilisant Tapatalk
  5. Why don't you use pump 93??? Did you check the UCCR? Envoyé de mon SM-S908W en utilisant Tapatalk
  6. ^^ I'm with dummy here Envoyé de mon SM-S908W en utilisant Tapatalk
  7. No. C-12 is useless. You should always run the least octane your setup can take, not the other way around. Octane don't make power. Use 91-93 pump gaz, ethanol free is better Envoyé de mon SM-S908W en utilisant Tapatalk
  8. Just use the oil and buy some easy available one after. Envoyé de mon SM-S908W en utilisant Tapatalk
  9. Any modern oil mixed in between 2% and 4% will be good. Envoyé de mon SM-S908W en utilisant Tapatalk
  10. Knock off pwk is a bad idea. Put real pwk 28mm You need the measure port timing with a degree wheel. Show pics of the porting job. And before you ask : use tapatalk. Envoyé de mon SM-S908W en utilisant Tapatalk
  11. 2 years ago, we were on an Industry 4.0 project with a China delegation. We tought we were on top of the game until we say their shops and what they are doing. It was a brutal awakening... I dont say Ali express stuff is good, but they sure can do quality stuff. They have the knowledge and the machines. Envoyé de mon SM-S908W en utilisant Tapatalk
  12. Chinese can make quality parts too and for less money. Envoyé de mon SM-S908W en utilisant Tapatalk
  13. Alibaba and the 40 thieves!!! Envoyé de mon SM-S908W en utilisant Tapatalk
  14. You must open the cases for sure. Envoyé de mon SM-S908W en utilisant Tapatalk
  15. Nope. Pics please. Envoyé de mon SM-S908W en utilisant Tapatalk
  16. For tranny, it's OK, for mixing with fuel, not that much. ;-) Envoyé de mon SM-S908W en utilisant Tapatalk
  17. Depends of where you wanna put it. Envoyé de mon SM-S908W en utilisant Tapatalk
  18. We are in 2024, let them identify as they want. Envoyé de mon SM-S908W en utilisant Tapatalk
  19. LED work better/longer on DC. It's better to separate de high voltage from the low voltage (floating the ground)/DC conversion. There is many video on YouTube on how to float the ground. Like Steven said, an ac/dc converter/rectifier is somethink like 15$ on ebay. Envoyé de mon SM-S908W en utilisant Tapatalk
  20. Driveline rock, Bill like Dicks. Envoyé de mon SM-S908W en utilisant Tapatalk
  21. CP also make banshee case ?? Envoyé de mon SM-S908W en utilisant Tapatalk
  22. You evil too. Envoyé de mon SM-S908W en utilisant Tapatalk
  23. I would go DMC 916, best sound in tha buisness!!! Envoyé de mon SM-S908W en utilisant Tapatalk
  24. You gay, as usual. Envoyé de mon SM-S908W en utilisant Tapatalk
  25. Pas aussi actif qu'avant ;-) Je suis seulement actif sur BHQ. Envoyé de mon SM-S908W en utilisant Tapatalk
×
×
  • Create New...