Jump to content

SeanC7

Members
  • Posts

    101
  • Joined

  • Last visited

Everything posted by SeanC7

  1. Ya, was going to sell this one (4mil) and build a cheetah but I did a speed test the other day after getting it dynod and his 94 mph and that was without me pinning it every gear I suspect I can get to 105ish Sent from my SM-N950U using Tapatalk
  2. Hey guys went out this weekend and my bike turned on its side coming out of the track while offloading. It landed awkward and tipped over on it's right side. The front rim has a dent not sure if it's from the fall and the back tire kind of has grass between the rim and tire. I've taken out most of it just wanted to know if it's safe to ride. I'll include pictures and I will likely be replacing the whole set of tires in the next couple months. Thx Sent from my SM-N950U using Tapatalk
  3. Gimme the deets 305-409-6037 Sent from my SM-N950U using Tapatalk
  4. The bike I have now has some subframe damage but last time I had it in the shop to get tuned my mechanic didnt seem too concerned safety wise. Sent from my SM-N950U using Tapatalk
  5. The big I have now has some subframe damage but last time I had it in the shop to get tuned my mechanic didnt seem too concerned safety wise. Sent from my SM-N950U using Tapatalk
  6. Thx Sent from my SM-N950U using Tapatalk
  7. Thx Sent from my SM-N950U using Tapatalk
  8. What's up guys, working on a new build, have put in some offers on some rollers in my area. I was wondering what I should look for when buying frames or rollers in terms of shaven/missing brackets. I want something completely stock but u know guys shave shit off and things break. Can anyone maybe include some pics or advice showing important brackets and mounts? Thx! Sent from my SM-N950U using Tapatalk
  9. SeanC7

    ISO Roller

    ISO Banshee frame A Arm Roller, nothing bent broken or shaven *Prefer a roller but may consider just a frame* Vins need to be visible, title is a plus bill of sale is fine if it has never been registered Prefer local pickup willing to drive a little, I live in South Florida Sent from my SM-N950U using Tapatalk
  10. Anyone have any a arm rollers close to florida? Clean vin, either titled or never registered. Completely stock nothing broken stripped or shaved off. Let me know! Sent from my SM-N950U using Tapatalk
  11. Nice, that's why I want to put some sparkles in it Sent from my SM-N950U using Tapatalk
  12. Hmmmm but is it worth whatever the price diff is vs the serval, I dont remember the prices Sent from my SM-N950U using Tapatalk
  13. Is it noticeable in anything other than top end 5/6 gear? Sent from my SM-N950U using Tapatalk
  14. Looks dope Sent from my SM-N950U using Tapatalk
  15. Ya right around that amount Sent from my SM-N950U using Tapatalk
  16. Ya I know there are a few factors just looking for a general estimate, thx mate! I'll start looking for a frame in a few months and get this show on the road...may even just get a roller and replace certain things to make it look brand new. Not really jumping or doing anything crazy so I think stock shocks would be OK. Sent from my SM-N950U using Tapatalk
  17. That sounds good, I'm getting my current bike tuned and dynod next week so I'm curious to see the HP on that. What would you say the top mph would be for a HP in the 80s Sent from my SM-N950U using Tapatalk
  18. Forgot to mention, I want to avoid race gas lol Sent from my SM-N950U using Tapatalk
  19. No sand here, I got a 4 mil now with some port work, how much more power would a serval bring to the table? Like I said I really want to build a new bike from the ground up, this bikes ugly and beat but it rides perfectly, and instead of replacing everything on this bike I figured it would be more enjoyable and make more sense to start fresh and eventually sell the current bike I have Sent from my SM-N950U using Tapatalk
  20. I figured a big bore would be overkill Sent from my SM-N950U using Tapatalk
  21. Hey guys, Looking to start a build by the end of this year. I'm in south Florida so there aren't many hills or dunes just basic trail riding and street riding. I currently have a 4 mil with some port work, cpis, reeds etc. I almost want to turn it into a cub since I already have the crank but then I figure I would rather just build a new bike from scratch. Anyways, based on the type of riding I mentioned above, what would be my best bet in terms of engine type, big bore cheetah, cub, serval etc? Or is what I currently have the balanced and best for what I do? I want to start from the ground up. Sent from my SM-N950U using Tapatalk
  22. Congrats man looks great Sent from my SM-N950U using Tapatalk
  23. Hardest part will be finding those plastics with the stickers. Sent from my SM-N950U using Tapatalk
  24. Looks awesome! I probably would have done the hubs in red but that's basically the scheme I'm looking for, hows the frame look in person? Sent from my SM-N950U using Tapatalk
×
×
  • Create New...