Jump to content

houghkyle

Members
  • Posts

    40
  • Joined

  • Last visited

Previous Fields

  • My Banshee (optional)
    2006 - "Special Edition" - Black - ALL STOCK (For Now)

houghkyle's Achievements

HQ Noob

HQ Noob (1/5)

2

Reputation

  1. It also seems to bog pretty bad until it hits the band. It is almost like I have to be WOT everywhere I go or it tends to bog down.
  2. I did a leak down test and it was good. Whats the best way to test the water pump? Would you suggest I step down on my mains?
  3. 06 banshee, CPI small bore, 64.5 bore, milled head, race port, +4 timing, K&N in box and lid off, and lightened timing. I am running 350 mains and 32.5 pilot. 1300 ft elevation. Bike runs good and starts good but it seems like it get really hot quickly.
  4. No not wanting to run race fuel. I use to run 93 octane but everyone in Wichita stopped selling it. Just thought bumping up a little in octane couldn't hurt.
  5. I live in Wichita KS and the highest octane fuel we can get is 91. What other options do I have? Is there a additive I can use to bump my octane up? My bike is bored 1 over, race ported, milled head to 21cc, K&N in box, CPI pipes, and +4 timing.
  6. I just went from completely stock banshee to bored 1 over, CPI inframe small bore, ported, advance timing +4, lightened flywheel, and K&N pro flo in the box. I need a starting point for jetting. I tried the jetting forum but nobody is replying. I am thinking 32.5 pilot and 350 main. Any suggestions?
  7. Can anyone help me on this? I am getting ready to pick up the jets and I just want to make sure i am getting the ones I need.
  8. I just went from a completley stock banshee to bored 1 over, CPI inframe small bore pipes, ported, milled head, advanced timing to +4, lightened flywheel, and K&N filter in the box. I was told to start my jetting at 32.5 pilot, 350 main. Is this a good starting point for my bike?
  9. What do you mean by "regular mikuni" jet?
  10. Can someone tell me what the bottom pilot jet goes to? I went into my local bike shop to get a 32.5 pilot jet for a 2006 banshee stock carb and the bottom jet is what they gave me. When I went to go change it out with the stock jets, I noticed they were different. What is the difference between these two jets?
  11. What is a good premix ratio for my bike? 40:1 or 32:1?
×
×
  • Create New...