MyNameIsMud

Good deal and good luck bro!

THe oils specific to motorcycles. This is what i run http://www.amsoil.com/storefront/mcf.aspx

Acetone takes it right off.

I love amsoil and run it in all my vehicles do you have pics of the decals you have availible?Id like to get some. Not for posing just because i like their product its the best!

I had a coolant leak not long ago luckily it wasnt getting into the cylinders but it was wicking up the threads on a few studs. What i did was after checking the heads plain for any warpage bought an oem gasket and used the copper spray gasket adhesive.I put 4-5 coats on it and reinstalled per the torque specs and its been good since. The k&s gasket i had before just wasnt cutting it.

I know theres no pump thats why i said how would you pump it?I figured some sort of electric pump but thinking it over its too much effort for little to no gains to convert it all over. I have an off brand ebay 40% bigger radiator and i run amsoil full synthetic 10w30 in the gear box. According to my trail tech i on average in 90+ temps run no higher than 185 on the trails and when cruising 165-175. I should have gave it more thought.

I just figured with more capacity and a way to cool it down that may add life to the clutch and even help the engine its self run cooler but if its not going to make any difference its pointless.

LOL i know where that comes from. Sorry i should have said trans cooler. Thats what i meant.

I was working on a friends 400ex and it has an engine oil cooler and i wondered if theres a way to do something similar on a banshee?Or if it was even worth it?Would it even help?How would you pump the oil?

The pistons are clearanced when you put the final hone and cross hatch on the cylinder. Thats why most builders want you to have the pistons so they can FIT them when over bored and what not.

AMSOIL's good stuff id trust them over lucas. Rural king even carries amsoil now and its pretty cheap at 9-10 a qt.

Maybe some water wetter or purple ice additive?

Took me about 2hrs to put mine in but i used wire loom and made it pretty. I would use the hose for the water temp that was the whole reason i bought one.

I asked about these too not long ago. a buddy bought a ltz400 and had boxes of extra stuff and had one of these in it and he gave it to me. DK if the guy meant to put it in but he had 3 bad ass banshees. This ones new in the box and is made by procomp i plugged it in and it ran so idk but i kept it as a spare. I wonder if the advanced settings work? Mine has 0-9 with a max advance of +5 with all different rpm ranges.

Split the cases and then lots of PICS!!!!!!!!