Jump to content

Buckwheat

Members
 View Profile  See their activity

  • Posts

    1,451

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by Buckwheat

  1. Buckwheat

    front shocks

    Buckwheat replied to Vicstuff's topic in Wanted

    I have a set with black springs, like new off my 06.
  2. Buckwheat
    Very nice, and excellent prices!
  3. Buckwheat
    I had an RM Stator coil. It lasted about 6 rides. Junk. If you want top quality that won't leave you stranded, spend a little more and buy from sheerider1026.
  4. Buckwheat
    Whatever happened to Borrink?
  5. Buckwheat
    Yes.
  6. Buckwheat
    Haven't heard. He was smoking a fine looking brisket a few days back.
  7. Buckwheat
    We are a Ram Mount distributor. Go here and see if what you want is there. http://www.rammount.com/
  8. Buckwheat
    lol
  9. Buckwheat
    Is that the one the housing was leaking on that messed the camera up?
  10. Buckwheat
    I used a heli-coil on one of my head studs and it worked great. Just make sure you get the heli-coil far enough down in the threads so the stud is installed at the proper depth. This is especially critical if using acorn nuts.
  11. Buckwheat
    From one old fart to another, welcome!
  12. Buckwheat
    Anybody ever find any old bottles, indian artifacts, etc?
  13. Buckwheat
    Mine did the same thing, found out the axle was slightly bent. Changed the axle, haven't rode it yet to see if it helped.
  14. Buckwheat
    Lol
  15. Buckwheat
    Back in my day, it was army boots junior, lol. Remember, they don't call me "Moses" around here for nothing.
  16. Buckwheat
    And your momma wears army boots!
  17. Buckwheat
    Haven't had a seconds problem with Gary's stator that I'm running.
  18. Buckwheat
    Please excuse the greasy finger smear on the axle.
  19. Buckwheat
    Ok, came up with a super easy way to install those aggravating locking rings in a matter of seconds. You will need a 2 foot piece of 1 1/4" PVC sch 40 pvc pipe and a rubber mallet. Go ahead and install everything, axle, sprocket, brake hub, and lock nut. Slip one or both locking rings on the axle. Next slip the pvc pipe over the axle, press it firmly against one of the locking clips and hit the end of the pvc pipe with the mallet. The locking clip will be instantly driven in place and the pvc pipe will not mar the finish. Then do the other side the same way.
  20. Buckwheat
    Shearer, FTW!
  21. Buckwheat
    So, is the lock ring recessed in the washer? The diagram they sent with the axle sucks. I don't want to put it together wrong and have to tear all that crap apart again.
  22. Buckwheat
    Only one problem I see with it. It's a Ford.
  23. Buckwheat
    Which way does the indented washer face? Does the indention face the lock ring or the brake rotor?
  24. Buckwheat
    I have them and like them.
  25. Buckwheat
    Shearers, FTW!

BHQ Quick Links

×
×
  • Create New...