Man-O-Steele

I also have the Omi. Been running one for 10 years. Great product. Sent from my iPhone using Tapatalk

Fireball long travel, Fox evol rc2, elka in the rear with lt link. Sent from my iPhone using Tapatalk

Have you tried contacting fireball? Their stuff is top notch

Toomeys with a hush kit in black would be sweet

What is your elevation?

I have some 21x12x8 9 paddle skat trak edges almost brand new for sale also.

You'd have fun with a 20x10x10 with 14 or 15 front and 41 rear sprocket.

He's pretty quick to respond on Facebook

Copy that. I'm real interested. PayPal at my finger tips.

Sent you pm's

I've messed with everything from stock to +6 on my serval dune bike. Stock arm was hard to do hill climbs with. The +6 arm was dumb and didn't handle or turn at all. After that I went to the +4 and it was a little bit better but the handling suffered badly. In the end I got a +2 and haven't looked back. It's got just enough extra length that it's fun on hill climbs but the handling doesn't suffer. A lot of guys buy a swing arm based on looks. Dont be that guy. You wind up selling the bike because you dont like riding it. Good luck. Sent from my SM-G965U using Tapatalk

Thanks. I'd like to rework my frame a bit. Trying to find some subframe ideas Sent from my SM-G965U using Tapatalk

Please share your duner sub frames. Sent from my SM-G965U using Tapatalk

Beautiful bike dude! Ours are very similar. I'm digging the brown.

This look right?

I saw a bike on banshee mafias page on Instagram with that bumper today. Could hit that guy up?

I actually just kept using what I had and start the bikes more frequently. I have since switch to amsoil dominator and thinking about blending it castor oil.

I guess I should add before everyone has a meltdown that I dont reccomend doing what I did and I'm not saying it will be ok. I'm just sharing what happened to me and i should also add that I was using klotz techniplate.

I did nothing last year and 3 out of 4 of our bikes were froze. Went to kick and they wouldn't roll over. Kept pressure on the kicker and they all finally rolled over and fired right up. Never had an issue after that bikes run fine.

Steering hoop bent was my guess. I've got a torch works and an Asi. Fitment was the exact same.

Cory is a good dude. I've have bought several items from him. Always super responsive and more than helpful.

I torque everything.

It's probably not shown because stock carbs have the tors and the tors delete caps are different. Hit up west coast atv parts or south Texas banshee. Or just about any sponsor. They will get you a gasket.

I've had 28s 33 and 35s on a serval and 28s are my favorite hands down. Longer ride time and far more responsive on the low end.

O ya they are top notch. I highly doubt they would mess that up