mike454

Looking for a drag harness for banshee and stock cdi for 97 up thanks michael

Have any pictures of carbs

Are these still available?

The motor is spittibg an popping out exhaust like it's goin lean but i have 118 main an dumps in 38mm mikunis an before this started with these dumps in it it would load up quick but now it's not

How much psi are yall shooting in the motor when doing leak down i did 8psi an didnt get any leaks

Ya same numbers on new pistons as old ones 20 thou base an same domes has stock cdi an switched it out with dyna see if it would make difference

Its spitting out of both Cylinders tried diff plugs wires caps diff fuel put big dumps in the carbs opened power jets all way open its not smoking like it should when you have it running no restrictions in the pipes ones im using are diff from ones i had on it when broke ring motor just went lazy when i lost that one cylinder an piston was all still there when tore it down

Pistons are in rite ring gap is 19thou compression before ring broke was 210 now left side is 180 an right is 160 new pistons an rings did leak down didnt find anything pickup is set at a business card thickness why am i getting feedback off my other cylinder when i block opposite side off?

Added more fuel to it to the point were i know it was way fat an still didnt help u can block off right carb an left side goes to smoking an running like it should an vice versa im needing help any an all will be appreciated thanks

Hey everyone i have a 4mill on alky thats giving me hell we had ring break couple months ago an it scared left cylinder so i sent cylinder to millinium got it back an now compression is way off from where it was an its also acting like its going lean spits out both pipes ive afde

I got a 4mill cub on alky an it keeps eating reeds any idea why it has banshee boyz cages with carbon fiber reeds