Blazer John

We will be there saturday thru sunday early afternoon and camping at the joint next door. cool if you could make it

Hey John I will try to make them all sounds like a blast! here are some dirt dates you asked about. Badlands in Attica IN june 9-10th. Haspin acres in Laurel IN in mid september no date set yet. thats the place with the 300 foot drag strip and 50+ acres of camping.

Will do thanks. the shee is overdue for some suspension work bad! There are track side pic`s in the crash forum check em out.

Cool time to dust off ye old persuader. Thanks

whats up I am looking for some measurements from the radiator hoop to somewhere strait on the back of the frame. i flipped the shee on her lid and bent the hoop back toward the gas tank. if anyone has a naked shee they can throw a tape measure across or if had to do a similar repair would be awesome. I heard this is a common spot for the frame to bend. gotta get the frame straight before fixing the other stuff. Thanks I will try to get better pics up naked (plastics off) if needed.

This was mine and a buddy's first big arena cross race at the Sears Center arena jan 14 2012. I was disqualified from practice for a missing kill tether thankfully another racer had a spare wired it in during practice. now up for qualifying just outa the gate halfway down the straight some guy used me like a ramp. neither of us really know what happened. needless to say I ended up with a broken rib and bruised from my hip to my shoulder. the shee suffered a bent control arm, tweaked radiator hoop, bent stem and bars and a missing headlight. still raced hurtin and the shee cut corners like an 18 wheeler. it was worth the experience and the props from the old guys for still racing a banshee!

Got A 2006 shee Just installed fmf sst`s power core 2, v-force 3, modquad with k&n, no lid, fmf boost bootle stock 26mm carbs 290mains stock pilot, airscrew out 1.5, needle on centre clip. shee runs great pulls hard but at 1/8-1/4 feathering the throttle it just dies intermittantly no bog just dead . tried pullin the choke and duplicating no change almost feels like an ignition prob did not notice with stock set up because shee always hesitated off the line a bit . possible tors BS? had my share of fun in the past with that crap. or can a carb adjustment cause this? Thanks

tryin to find a good clutch for my shee. stock 06 soon to get piped and jetted will prob blow up oe stocker

used it since my shee since new seems to be good stuff.