Jump to content

kawa110

Members
  • Posts

    3,658
  • Joined

  • Last visited

  • Days Won

    44

Everything posted by kawa110

  1. Use grease to “hold” the o rings on head if needed. I’ve never used the copper spray. Sent from my iPhone using Tapatalk
  2. Use sealer on metal mating surfaces such as shee cases. Paper gaskets for cylinder base and side covers. I don’t grease. Seen people grease paper gaskets to make removal easy and reusable. I don’t I replace them. Made plenty of paper gaskets from soda and beer box cardboard over the years. Seen metal gaskets for heads…either a “crush” style or copper plate/copper washers…no sealer. In a pinch I’ve taken the copper gaskets heated them until they “glow” and reused as long as they weren’t cracked or brittle. Sent from my iPhone using Tapatalk
  3. Teflon tape the threads and run the cap down. Purchase pwk 28’s. Good upgrade. Sent from my iPhone using Tapatalk
  4. Where you located? Sent from my iPhone using Tapatalk
  5. All sold. Packages go out Monday. Apologies for delay. Thanks. Sent from my iPhone using Tapatalk
  6. Definitely something bouncing around in ther. May be in bearings somewhere or shot out the exhaust port. Sent from my iPhone using Tapatalk
  7. Pwk28’s in for sale section. Sent from my iPhone using Tapatalk
  8. 250$ shipped to the 48 PayPal. U Add for fees Sent from my iPhone using Tapatalk
  9. Okay. Thnx These are a nice upgrade to OEM. Sent from my iPhone using Tapatalk
  10. Haven’t heard anything good from vitos. Get a stock used oem tank. Sent from my iPhone using Tapatalk
  11. be just fine. Sent from my iPhone using Tapatalk
  12. One set of two. 250$ Sent from my iPhone using Tapatalk
  13. I wouldn’t. Just Run longer hoses vent and overflow hoses. Sent from my iPhone using Tapatalk
  14. Adjust floats more but u run risk of running lean. Run hoses all the way to the very back of swing arm so they over flow out that back and not on bike. Sent from my iPhone using Tapatalk
  15. I don’t know. I purchased one and installed it. Haven’t ran bike. Seemed okay spinning it prior to mounting the cover. I felt the mull I installed wqs smoother. Sent from my iPhone using Tapatalk
  16. What a arms u have up front? Some will Say you don’t need the rear long travel. Some will say it is a benefit. I have not experienced rear long travel. What rear long travel are you planning? Frame shock mount relocation? No link? Aftermarket link? Sent from my iPhone using Tapatalk
  17. Anywhere to get get “quality” billet water pump gear? Sent from my iPhone using Tapatalk
  18. Can I still obtain a mull billet water pump gear, and waterpump? Mac daddy good quality? Sent from my iPhone using Tapatalk
  19. Look like Chinese knock off pwk34. I have some original Pwk28’s with filters brand new never used posted in for sale section yesterday. 380$ Sent from my iPhone using Tapatalk
  20. Not knock offs. New, no gas ran through them. Pwk28’s 2 sets 300$ for pair Knock off k and n angled filters new with outer wears new. 110$ (380$ carbs and filters) Used k and n filters with outerwears for stock carbs 50$ Sent from my iPhone using Tapatalk
  21. Want to buy complete throttle housing. Want to buy complete motor mounts and hardware. Want to buy metal coolant tube from clutch cover and short coolant hose Sent from my iPhone using Tapatalk
  22. Lots of info on here. For most part these machine pretty easy to work on. What kind of riding you plan on doing? Sent from my iPhone using Tapatalk
  23. Ice chest Sent from my iPhone using Tapatalk
×
×
  • Create New...