hercalmighty

We're the bikes in a shed or in a garage? Sent from my VS990 using Tapatalk

Just saw on FB that Fireball has new long travel arms that are more like the other brand full wing style arms Sent from my VS990 using Tapatalk

To add to tfaith's post. I bought+3+1 arms from fireball and had 3/2 rims. It handled like a lack truck. Bought 4/1 rims and it made a huge difference. Sent from my VS990 using Tapatalk

Slomo, are you running a plate for the 4mil or are the domes cut for a 4mil? When I had my 4mil stock jug with cut domes I had 20cc domes and was pushing around 180-185 psi. Then I went to 23cc domes and was pushing around 160-165 psi. Sent from my VS990 using Tapatalk

Do a leak down also before you open anything up Sent from my VS990 using Tapatalk

125 psi? Either you have a bad tester or something is screwed up. Did you check your squish? Sent from my VS990 using Tapatalk

Have you done a leak down test? Sent from my VS990 using Tapatalk

Well that's kind of the thing with powervalves. When the powervalves are down they mimic a low port and when they open they mimic a high port. When you drag port a cheetah you will lose some bottom but it's not like drag porting a serval. Your "metaphor" of PC's on a cub is way different. The Cub has fixed port timing set for a "drag" pipe. Putting a "woods" pipe on is just choking the motor Sent from my VS990 using Tapatalk

Do you have any idea how powervalves work? A drag ported cheetah is not like PC pipes on a cub at all Sent from my VS990 using Tapatalk

Need to know what jets are in it Sent from my VS990 using Tapatalk

Exactly Sent from my VS990 using Tapatalk

It seems like the people who actually go to his place and pick out their stuff are happy. EBay people not so much Sent from my VS990 using Tapatalk

Did you go back to 91 octane? Sent from my VS990 using Tapatalk

Thanks Spurdy. Sent from my VS990 using Tapatalk

Ok. Just looked at the bolts. They are 12.9 bolts. So just tighten the hell out of them or is there a torque I should go by. If it matters it has 4 pinch bolts. Sent from my VS990 using Tapatalk