87sheerips

ta ta ta ting ting tank tank ting ting ta ting ting yea yea toomeys baby

get a 4 stroke

Ok, might be a stupid question but I dont know much about reed valves. When I was taking apart my reed assembly today, I noticed that one of the boots (the triangular black rubber that goes into carb) I think its the boot at least. One out of the two triangles on one side has a little tear on the edge. It ran great before i took it apart. Should I replace it? Sorry about the confusion but any help or lesson on reeds, boots, and cages would be great, thanks

Mine are 66.675 mm, whats my bore size?>

Hey there, I have an 87 banshee, got the jugs out and want to paint most likely red. Whats the best way I should go about prepping and painting these bad boys. About Bore size, im reading 66.675 mm on each cylender. Is this .100 over?? My mechanic is thinking that its not .100 over, but im pretty sure it is. Please give me some advice!! thanks a lot.

Hey man, im tellin you, call james at the banshee connection, he has numerous banshees that he constantly rotates and parts out. he should have one for a couple bucks. He has so much shit.

Call the Man That i have posted under this. Yur problem will be solved. Tell him what U need, tell Him I sent ya and u should be all set for pretty cheap, even if u DO have to get a hub. do not go to the stealership, this guy is the shit!!

Hell yea, thanks for the info, Ill most likely be draggin sept 19, since my shee is under construction, im only an hour and a half away. its Great to find this out instead of driving 3 and a half to the dunes!!

Hey Hockey 390, where u at in michigan, I have an 87 too, we should go rippin. Im in kalamazoo right now, but originally from the east side. let me know

Im puttin a chainsaw motor on a little electric scooter right now. I mean this scooter is small, should be fun and dangerous!, by the way any tips on sprocket and chain comnbos would be appreciated shopping cart man. later

Good possibility its just your kickstarter bushing, banshees are famous for it. check it out. Call up the guy on my signature, he rebuilds em for about 20 bucks i think

Sounds Like a Parking Brake switch issue to me.

U can order one of those boots from this source , positive that he has one CALL JAMES AT THE BANSHEE CONNECTION!! TELL HIM JD FROM MICHIGAN SENT YOU. 601-941-7679, YOU WONT BE DISSAPOINTED!!!!!!

I just rebuilt My rear Brakes Cuz Mine was missing that too. It is a rubber sleeve thats a bitch gettin back in. I still had mine, But u kinda just have to shove it in with a small flat head, I dont have a pic but I hope i gave a hand.CALL THE GUY AT THE END OF MY REPLY, HE SHOULD HAVE ONE FOR YOU FOR SURE, FORA REALLY GOOD PRICE.

Banshedog, k-zoo is pretty cool right now, u know how it is. Im over in the downtown area, vine and rose if u know where it is. Yea, im goin into my year at western in the fall, at kvcc now. Im guna try to get my shee done by then, maybe we can meet up and shred the dunes up.

Im in the process of a frame up rebuild on my 87 shee. I have to get a new case on her cuz my old ass chain flew through it. anyways, im bored .100 over, toomey T5s, 34mm keihin carbs, k/n with outerwear, 13/42 gears, tors off, . So im hearing that advancing the timing gives some good power? how do I do it and is it worth it? what could I do for some cheap H.P in this rebuild? thanks guys

Silver Lake is the shit, Ill have my Shee ready for Labor Day, Let me know , It'd Be sweet to meet some of u guys around michigan, Im in kalamazoo.

Just got back!! Im rebulding my shee right now so I couldnt ride, but we took my buddies F-150. Im tryin to get the pics on here but im havin problems, ill post em as soon as i can. Silver lake is the shit!

SILVER LAKE SAND DUNES, MEARS MI. BAD ASS PLACE TO RIDE, JUST NEED AN ORV AND A FLAG AND YUR SET. CHECK IT OUT, U WONT BE DISSAPOINTED.Woops, right on lake michigan about 3 hours into state. Plenty of big dunes about 2500 acres I think, draggin, water holes, and a huge beach area to hit up. I just got back from 4th of july and it was a bash. Id load some pics, but its not lettin me. check it out!

Qestion on shrink wrap, can u shrink it with a hair dryer??

Im rebuilding my 87 right now, and want to shine up my old and dirty hoses. Whats the best way to clean, and make look like new on some old ass hoses??, they r still in good shape, but dirty as hell, thanks for the help.

Forgot to post it in my other thread, I need all three shockwears in red if n e one can help, thanks

I need an o-ring chain, and some spare bolts and shit, and the rear skid plate, let me know

Hey there, I need an Oring chain for a god prics asap, thanks a lot

NEED A 42 TOOTH SPROCKET AND O RING CHAIN FOR MY 87 SHEE, STOCK SWINGARM LENGTH. THANKS, JD