Jump to content

Dm cylinders on stock cases.


penguin

Recommended Posts

I call myself looking for this info on google but no luck. My question is are the cylinder base studs relocated to fit the dm cylinders on stock cases. I know other extensive work has to be done which is more than I can do. But Reason I ask is I have a set of cases with one stud broken off in the case. If they are relocated to fit the dm style cylinders then I won't worry as much about getting it out without damaging the case but if they stay in same position then I need to be very careful when extracting the broken stud.

Link to comment
Share on other sites

If you are going to do a DM in stock cases I would HIGHLY suggest starting with a BRAND NEW set of cases. it is too expensive to set them up to be messing with a nasty old set that has been hot/cold 5000 times, flexed, whacked, beat, etc..... Buy new!

Link to comment
Share on other sites

  • 3 weeks later...

is it just me or does these transfer look very asymmetric from one side to the other ?

 

huh_zpsyvgisfdw.jpg

"Inside transfers " ? Yeah they look a little uneven don't they lol.

 

Sent from my SM-S820L using Tapatalk

Link to comment
Share on other sites

no the inboard 6 trans look all sqaushed up more than the outer 6

With a 102 spread there is limited space there. Those are a 78 bore. Now think about a DMX that is 80 83 or even 85 bore. Now you will analyze this to death, but the 85 bore DMX's have proven to be superior in performance than its 120 spread Cougar cyld big brother.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...