Jump to content

96n97banshee

Members
  • Posts

    11
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Interests
    [IMG]http://i1201.photobucket.com/albums/bb353/chrismjr/IMG_0740.jpg[/IMG]

Previous Fields

  • My Banshee (optional)
    [IMG]http://i1201.photobucket.com/albums/bb353/chrismjr/IMG_0740.jpg[/IMG]

96n97banshee's Achievements

HQ Noob

HQ Noob (1/5)

0

Reputation

  1. yea all brand new got the whole rebuild kit
  2. okay so first i thought it was the needle seat was bad they looked fine but i got 2x k&l rebuild kits that didnt stop the problem i doubled check the float height exactly 21mm i even replaced the reeds what the hell else could it be ? im running fmf pipes vforce 3 reeds carbon fiber boost bottle k &n filter it has 290 main 27.5 pilots needle in the middle position forgot to add it doesnt leak when its sitting their off or at idle i never actually c it leak but i but ziplock bags around the overflow tubes and ziped tied them on and in the bags after the ride their had prolly a quater cup of gas both of them combined
  3. im gonna try a 300 ill post it up when i get the new jetts only got up too 290 figuring that would b plenty
  4. these were just wot plug chops did 2 runs on both first thew sixth
  5. i was thinking of trying a 300 just to c what color i would get .... and on the top end i feel like i could build a lil more rpms and im rilly surprised its taking a main this big cause it only has sst fmf pipes and a k&n filter and they recommend a 260
  6. should i go too a 300 or is the 290 good?
  7. engine is .20 fmf pipes vforce 3 reeds with trinity 2 into 1 carb i belive its a 35mm something like that im going to run a uni pod filter on the back of it im running in 80 degree weather at about 600-1200 elevation where should i start my jetting dont kno what sizes comes in them
  8. okay so i have heard that the trinity 2 into 1 isnt the best setup but i got for free now my question is trinity 35 mm 2into 1 with vforce 3 reeds vs stock carbs w/ stock reeds goo if you have a reason like they suck plz tell why
  9. 100 bucks for the flywheel and stator and what type a-arms does it have ?
  10. replaced the vacuum lines on the carb's yesterday and when i did i made them long enuff so they would tuck down right b4 swingarm.... originally they were like 3 inches long they r like 7 inches now ...anyways reason i am asking is jetting seems to b a little off now idk if longer vacuum lines will effect jetting ... if so how long r they suppose to be ?
  11. im looking to spend about 200-250 for a nice set of lonestar +2+1 a-arms lemme kno
×
×
  • Create New...