I have a red 5 gal and i have a Blue banshee
looking to trade for a two into one intake with carb or another
gas tank thats blue

Sorry for the quality:
http://youtube.com/watch?v=SgNHW6JKjj4

If anyone interested, this is better quality:
http://rs224gc2.rapidshare.com/files/113651914/4k3.wmv

ok, my shee had some boyessen dual stage petals on w/o reed stoppers and just a little flat plate of metal, that was bolted to the reed petals and cages (i think it would be a reed petal stiffener...not sure). the petals were pretty much junk, so i installed some new carbon techs. i also installed some reed stoppers on my stock shee cages, w/some fresh carbon tech petals and when i installed the cage assembly into the cylinder, i noticed that the top reed stopper blocks off almost half the flow to the little port on top of the 2 large intake ports. i know on the sx700 yamaha snowmobiles, they have this same issue, and guys will either use reed spacers or notch the top reed stopper, so it doesn't block off the flow like this. so here's what i'm wondering....what will be my best thing to do? should i just remove the reed stoppers period, should i just notch the top reed stopper, or should i get some reed spacers?

Hello all,
I have almost finished my banshee build, but my last problem is with the geometry when standing.
I have already ordered a lonestar +2+1 stem, fast flexx handlebars AND ims blaster foot pegs(They go straight out of the frame, notforward like the stock ones)
So the bars will e more in front and pegs more in the rear, which is great. But its not standart and I cant find some final parts for it, can you please help me find a solution?
-The brake pedal and shifter will be too long with the blaster pegs. Where to buy shorter ones?
-The nerf bars and heel guards. Right now I have stock heel guards and some nerfbars, but neither will fit eith the blaster pegs - any advice/solution avaliable?

Thank you very much!

Does it matter which ring goes on top or bottom? Or are they both the same? Thanks in advance.